2003 Peugeot Partner

Central Exhaust system insecure (6.1.2 (a))

Exhaust has a major leak of exhaust gases front section (6.1.2 (a))

Indicator switch inoperative lose and comes on when driving and sometimes does not work (4.4.2 (a) (ii))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Offside Rear Service brake lagging in operation (1.2.1 (d))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Service brake efficiency below requirements (1.2.2 (a) (i))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Front Brake pad(s) wearing thin (3.5.1g)

Front brake discs worn/rusty edges

Nearside Front Tyre worn close to the legal limit edges worn (4.1.E.1)

Offside Front Tyre worn close to the legal limit edges worn (4.1.E.1)

eml staying on

Front brake disc worn, pitted or scored, but not seriously weakened inner face (3.5.1i)

Nearside Front Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Tyre worn close to the legal limit outer edge (4.1.E.1)

Nearside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Front brake disc worn, pitted or scored, but not seriously weakened inner face (3.5.1i)

Nearside Front Lower Anti-roll bar linkage has slight play in a pin/bush (2.4.G.2)

Tyre worn close to the legal limit outer edge (4.1.E.1)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

nearside front tyre/whell damaged.

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Outer Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

both front tyres worn on inner edges,n/s front tyre side wall damaged,all wheels slightly corroded/damaged

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Outer Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

both front tyres worn on inner edges,n/s front tyre side wall damaged,all wheels slightly corroded/damaged

nearside front wheel damaged,tested wet,washers poor operation,

windscreen damaged outside swept area

Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

windscreen damaged outside swept area

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Rear Direction indicator incorrect colour (1.4.A.2f)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Nearside Stop lamp not working (1.2.1b)

Offside Rear Direction indicator slightly discoloured (1.4.A.2f)

slight play nearside front lower ball joint

both rear tyres are of incorrect ply rating for vehicle (fitted with car tyres instead of van tyres)

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Seat belt damaged but not affecting the operation of the belt (5.2.2a)