MOT Status
ExpiredMileage
117,907 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Position lamp not working (4.2.1 (a))
Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced wheel arch (7.1.1 (a) (i))
Offside Front Position lamp not working (4.2.1 (a))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive damper mount (5.3.6 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive damper mount (5.3.6 (a) (i))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Side repeater lens defective which has no effect on emitted light (4.4.1 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive damper mount (2.4.A.3)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive damper mount (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)
Oil leak ()
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive damper mount (2.4.A.3)
Offside Rear Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive damper mount (2.4.A.3)
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)
Oil leak ()
Registration plate lamp not working (1.1.C.1d)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (2.4.A.3)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit on 1.6mm (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive shock absorber (2.4.A.3)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside rear tyre starting to step
Offside wiper blade torn
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Exhaust has a major leak of exhaust gases Manifold (7.1.2)
Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)
Offside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside rear tyre starting to step
Offside wiper blade torn
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Nearside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Road wheel with a slightly distorted bead rim (4.2.A.1a)
Offside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front position lamp(s) not working (1.1.A.3b)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
How Reliable is the Toyota Yaris?
Based on 9,038,234 MOT tests across 631,037 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HG51 HFM is a 2001 Toyota Yaris in Silver with a 998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 70.6%.
Across all 2001 Toyota Yaris models, the average MOT pass rate is 74.7% with a typical mileage of 69,035 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Yaris fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 149,812 recorded failures. If you're considering buying HG51 HFM, it's worth having these areas checked by a mechanic before committing.
The Toyota Yaris typically stays on UK roads for around 27 years. At 25 years old, this Toyota Yaris is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HG51 HFM?
You can check the full history of HG51 HFM by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HG51 HFM registered?
HG51 HFM is a 2001 Toyota Yaris, first registered on 27 September 2001.
Is HG51 HFM safe to buy?
The MOT history for HG51 HFM shows 17 tests with a 70.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HG51 HFM have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HG51 HFM. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.