2001 Peugeot 206

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Rear Radius arm has excessive play in a pin/bush (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Central Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Brake load sensing valve seized (3.6.E.3)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Stop lamp not working (1.2.1b)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

front brake discs excessively worn

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Exhaust has a major leak of exhaust gases (7.1.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both front flexis cracking

both side repeater bulbs slightly white

engine oil leak

front discs lipped

front inner brake pads appear low

fuel tank support bracket corroding

offside front lower arm rear bush splitting

rear number plate in poor condition

slight judder from front brakes

slight play nnearside front drop link

small cut nearside front tyres sidewall

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Brake pedal has insufficient reserve movement (3.3.A.5)

Centre Exhaust mounting missing (7.1.1b)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside rear brake recording little or no effort (3.7.B.5a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)

Offside rear brake recording little or no effort (3.7.B.5a)

Parking brake lever has no reserve travel (3.1.6b)

Rear Statutory seat belt missing (5.1.1)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Exhaust emissions hydrocarbon content after 2nd fast idle excessive (7.3.D.3)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Front Exhaust has part of the system slightly deteriorated (7.1.1a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

some test items hidden by covers and components

Rear Brake load sensing valve linkage obviously incorrectly adjusted (3.6.E.3)

Rear Brake load sensing valve linkage seized (3.6.E.3)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Brake pad(s) wearing thin (3.5.1g)

Suspension arm has slight play in a pin/bush (2.4.G.2)

washers weak