MOT Status
ExpiredMileage
100,998 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind fuel pipes (5.3.6 (a) (i))
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Offside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
fuel filler neck corroded
Centre to rear exhaust joint corroded
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both front lower wishbone rear bushes (5.3.4 (a) (i))
Fuel Pipe/s corroded Fuel filler pipes ()
Handbrake has little reserve travel
Nearside Front Tyre worn close to legal limit/worn on edge Wearing on inner edge (5.2.3 (e))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Tyre wearing on inner edge
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill (5.3.6 (a) (i))
Centre to rear exhaust joint corroded
Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement Both front (5.3.4 (a) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement Both front lower wishbone rear bushes (5.3.4 (a) (i))
Fuel Pipe/s corroded Fuel filler pipes ()
Handbrake has little reserve travel
Nearside Front Tyre worn close to legal limit/worn on edge Wearing on inner edge (5.2.3 (e))
Nearside Rear Shock absorbers light misting of oil or has limited damping effect (5.3.2 (b))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Tyre wearing on inner edge
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs (5.3.6 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Brakes imbalanced across an axle by more than 50% (1.2.1 (b) (ii)) DANGEROUS
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive both rear chassis legs (5.3.6 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Brakes imbalanced across an axle 38 % slight bind nsf (3.7.B.5b)
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)
Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
surface corrosion to under side of vehicle rear
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake lever has little reserve travel (3.1.6b)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
surface corrosion to under side of vehicle rear
Centre Stop lamp not working (1.2.1b)
Nearside Rear Rear wheel bearing rough when rotated (2.6.1)
Rear exhaust system slightly deteriated
Vehicle structure has slight corrosion (6.1.A.1)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Rear exhaust system slightly deteriated
Vehicle structure has slight corrosion (6.1.A.1)
Centre Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Centre Stop lamp not working (1.2.1b)
Nearside Headlamp aim too high (1.8)
Nearside Rear coil spring incomplete (2.4.C.1a)
Offside Rear coil spring incomplete (2.4.C.1a)
Horn not working (1.6.2a)
Nearside Registration plate lamp not working (1.1.5c)
How Reliable is the Toyota Yaris?
Based on 9,038,234 MOT tests across 631,037 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HG51 SBU is a 2001 Toyota Yaris in Blue with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 60.9%.
Across all 2001 Toyota Yaris models, the average MOT pass rate is 74.7% with a typical mileage of 69,035 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Toyota Yaris fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 149,812 recorded failures. If you're considering buying HG51 SBU, it's worth having these areas checked by a mechanic before committing.
The Toyota Yaris typically stays on UK roads for around 27 years. At 25 years old, this Toyota Yaris is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HG51 SBU?
You can check the full history of HG51 SBU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HG51 SBU registered?
HG51 SBU is a 2001 Toyota Yaris, first registered on 30 November 2001.
Is HG51 SBU safe to buy?
The MOT history for HG51 SBU shows 23 tests with a 60.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HG51 SBU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HG51 SBU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.