MOT Status
ExpiredMileage
82,758 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
undersealed underbody/components
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle front mount (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength axle front mount (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive strut top mount (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive strut top mount (5.3.6 (a) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch at upper shock mount (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced at axle mount (6.1.1 (c) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced at axle mount (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced underbody (6.1.1 (c) (i))
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Sub-frame corroded and seriously weakened (5.3.3 (b) (i))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch upper at shock mount (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced at axle mount (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced at axle mount (6.1.1 (c) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced underbody (6.1.1 (c) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle front mount (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Offside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle front mount (5.3.6 (a) (i))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Offside Front Brake pipe excessively corroded (1.1.11 (c))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))
Nearside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle front mount (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement wishbone rear bush (5.3.4 (a) (i))
Offside Rear Hydraulic brake cylinder corroded but not seriously weakened (1.1.16 (d) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive axle front mount (5.3.6 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Parking brake inoperative on one side (1.4.1 (a))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Brake lever has insufficient reserve travel (1.1.2 (a))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Rear Brake pipe excessively corroded front to rear (1.1.11 (c))
Offside Rear Parking brake inoperative on one side (1.4.1 (a))
Nearside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement rear most (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 2mm/ worn on edge (5.2.3 (e))
Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge 3mm/ worn on edge (5.2.3 (e))
Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Suspension arm pin or bush worn but not resulting in excessive movement both rear trailing arm bushes deteriated (5.3.4 (a) (i))
Nearside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Brake pipe slightly corroded front to rear (3.6.B.2c)
Nearside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
How Reliable is the Peugeot 107?
Based on 2,229,410 MOT tests across 139,779 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HG57 FJE is a 2007 Peugeot 107 in Red with a 998cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 62.5%.
Across all 2007 Peugeot 107 models, the average MOT pass rate is 74.0% with a typical mileage of 56,654 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Peugeot 107 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 42,280 recorded failures. If you're considering buying HG57 FJE, it's worth having these areas checked by a mechanic before committing.
The Peugeot 107 typically stays on UK roads for around 21 years. At 19 years old, this Peugeot 107 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HG57 FJE?
You can check the full history of HG57 FJE by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HG57 FJE registered?
HG57 FJE is a 2007 Peugeot 107, first registered on 26 October 2007.
Is HG57 FJE safe to buy?
The MOT history for HG57 FJE shows 24 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HG57 FJE have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HG57 FJE. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.