2008 Ford Ka

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush. (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement Trailing arm bush. (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension component pin or bush slightly worn rear bush perishing (5.3.4 (a) (i))

Rear Exhaust mounting defective back box mounting bracket snapped (6.1.2 (a))

Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced 30cm from suspension arm (6.1.1 (c) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Suspension component pin or bush slightly worn rear bush perishing (5.3.4 (a) (i))

Rear Exhaust mounting defective back box mounting bracket snapped (6.1.2 (a))

Front Brake pad(s) wearing thin nearside and offside (1.1.13 (a) (ii))

Offside Front Inner corrosion to sill not excessive at time of test

Offside Rear Outer corrosion to sill not excessive at time of test

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

general light corrosion to bulkhead not excessive at time of test

Rear both tyres perished

Nearside Headlamp aim too low (1.8)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Headlamp aim too high (1.8)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Road wheel bead rim badly distorted (4.2.A.1a)

Offside Stop lamp not working (1.2.1b)