MOT Status
ExpiredMileage
68,243 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive wing (5.3.6 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive inner + outer sill (5.3.6 (a) (i))
Offside Windscreen wiper blade defective (3.4 (b) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive inner + outer sills (5.3.6 (a) (i))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Seat belt anchorage prescribed area is corroded but not considered excessive inner sills (7.1.1 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive drop down from chassis (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced door step (7.1.1 (a) (i))
Front Subframe mounting prescribed area is corroded but not considered excessive drop down from chassis (5.3.6 (a) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))
Power steering component has slight seepage from a component (2.1.5 (a))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HHZ 7390 is a 2006 Ford Ka in Red with a 1,299cc petrol engine. This vehicle has been through 3 MOT tests with a personal pass rate of 33.3%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HHZ 7390, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HHZ 7390?
You can check the full history of HHZ 7390 by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HHZ 7390 registered?
HHZ 7390 is a 2006 Ford Ka, first registered on 31 March 2006.
Is HHZ 7390 safe to buy?
The MOT history for HHZ 7390 shows 3 tests with a 33.3% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HHZ 7390 have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HHZ 7390. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.