2005 Mercedes-benz Viano

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner and outer sill/floor by jacking point (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Suspension system inoperative (5.3.5 (a)) DANGEROUS

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner wing (6.1.1 (c) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill (6.1.1 (c) (i))

Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced Inner wing (6.1.1 (c) (i))

Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush's (5.3.4 (a) (i))

Windscreen wiper blade defective (3.4 (b) (i))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement D bush (5.3.4 (a) (i))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Front Brake pipe corroded, covered in grease or other material Offside under bonet (1.1.11 (c))

Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Front Windscreen wiper not working (3.4 (a))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outtersil (5.3.6 (a) (i))

Nearside Side repeater not working (4.4.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Windscreen wiper not working (3.4 (a))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever defective so that it cannot be satisfactorily operated Handbrake release handle (1.1.6 (d))

Front Brake pipe corroded, covered in grease or other material Offside under bonet (1.1.11 (c))

Nearside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Offside Front Brake hose slightly deteriorated (1.1.12 (b) (ii))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Suspension pipe modified but function not affected (5.3.5 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Headlamp aim too low (4.1.2 (a))

Nearside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Offside Rear Suspension component mounting repair covered in underseal (5.3.6 (a) (i))

Rear Suspension pipe modified but function not affected (5.3.5 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Bonnet cannot be secured in the closed position (3.1 (b) (i))

Nearside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Nearside Rear Parking brake inoperative on one side (1.4.1 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above air spring (5.3.6 (a) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Above air spring (5.3.6 (a) (i))

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Rear Suspension system inoperative (5.3.5 (a)) DANGEROUS

underside of vehicle has surface rust all over.

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

engine covers fitted

Bonnet retaining device ineffective bonnet wont open (8.4.2)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Front Headlamp not working on dipped beam (1.7.5a)

Nearside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Front Headlamp excessively deteriorated so that the light output is severely reduced (1.7.5a)

Offside Front Track rod end ball joint has excessive play (2.2.B.1f)

Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings cill coroded (6.1.B.2)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

engine covers fitted

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x 3 patches (6.1.B.2)

Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill x 1 patch (6.1.B.2)

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Rear brake disc slightly scored (3.5.1h)