2005 Honda FES125

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Brake disc contaminated (1.1.14 (b))

Front Brake pad(s) contaminated (1.1.13 (b))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Front Tyre worn close to the legal limit (5.2.3 (e))

Offside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Nearside Rear spring corroded but not seriously weakened Shock absorber (2.4A1b(ii))

Noise from drive when rear wheel is turned

Number plate light not working

Offside Rear spring corroded but not seriously weakened Shock absorber (2.4A1b(ii))

Rear Tyre worn close to the legal limit 1mm recorded at centre area (4.1.3(ii))

Rear mudguard cracked

Nearside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Offside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Slight rust pitting on fork stanchions

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Nearside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Offside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Slight rust pitting on fork stanchions

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement excessively 'notchy' with the wheel raised (2.2.1b)

Final drive very noisy

Front suspension assembly slightly corroded. both fork stancions pitted (2.3.1)

Nearside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Number plate light inop

Offside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Floor brake test indicates a slightly juddering brake (3.3C2d.)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Exhaust slightly deteriorated (7.1.1a)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Nearside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Offside Front shock absorber has light misting of stanchion (2.3.3)

Offside Rear spring corroded but not seriously weakened (2.4A1b(ii))

Rear Brake disc(s) is slightly distorted (3.2.A1m)

Rear wheel bearings are slightly rough (2.4.A.2c)

Steering movement slightly 'notchy' (2.2.1a)

number plate light inop

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Offside Front shock absorber has light misting of stanchion (2.3.3)

Rear Tyre valve stem slightly damaged (4.1.2c)

Rear drive noisy,when turning rear wheel

Steering movement slightly 'notchy' (2.2.1b)

Final drive bearings rough

Front suspension assembly slightly corroded. (2.3.1)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Floor brake test indicates a slightly juddering brake (3.3C2d.)

Steering movement slightly 'notchy' (2.2.1a)

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Floor brake test indicates a binding brake (3.3.C2c) DANGEROUS

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii)) DANGEROUS

Final drive bearings rough

Front Brake pad(s) close to minimum limit (3.2A1f(ii))

Front suspension assembly slightly corroded. (2.3.1)

Rear Brake disc(s) has slight run out (3.2.A1m)

Rear Floor brake test indicates a slightly juddering brake (3.3C2d.)

Steering movement slightly 'notchy' (2.2.1a)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Sounds slightly rough when turning rear wheel

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly scored (3.2.A1l)

Front Brake disc(s) slightly scored (3.2.A1l)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Brake disc(s) slightly scored (3.2.A1l)