MOT Status
ExpiredMileage
102,380 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-lock braking system warning lamp does not illuminate (1.6 (a))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Inner Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) DANGEROUS
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Position lamp not working (4.2.1 (a))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor area (2.4.A.3)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Battery insecure (1.9.1)
Nearside Front Subframe mounting prescribed area is excessively corroded floor area (2.4.A.3)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Offside Front Subframe mounting prescribed area is excessively corroded floor area (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded axle mount (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement axle bushes (2.4.G.2)
Offside Front Front position lamp(s) not working (1.1.A.3b)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Upper Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement axle bushes (2.4.G.2)
Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Driver's door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Front Suspension arm synthetic bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Inner Front Road wheel bead rim badly distorted (4.2.A.1a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1) DANGEROUS
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HJ06 BEL is a 2006 Ford Ka in Yellow with a 1,299cc petrol engine. This vehicle has been through 19 MOT tests with a personal pass rate of 52.6%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HJ06 BEL, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HJ06 BEL?
You can check the full history of HJ06 BEL by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HJ06 BEL registered?
HJ06 BEL is a 2006 Ford Ka, first registered on 28 July 2006.
Is HJ06 BEL safe to buy?
The MOT history for HJ06 BEL shows 19 tests with a 52.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HJ06 BEL have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HJ06 BEL. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.