MOT Status
ValidMileage
85,323 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Inner Subframe mounting prescribed area is corroded but not considered excessive wheel arch (5.3.6 (a) (i))
Offside Front Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner seal by jacking point (6.1.1 (c) (i))
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material replace asap (1.1.11 (c))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner seal by jacking point (6.1.1 (c) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
under side covered in underseal
Nearside Front Front passenger door cannot be opened from outside the vehicle (6.2.3 (a))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner seal by jacking point (6.1.1 (c) (i))
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Brake pipe corroded, covered in grease or other material replace asap (1.1.11 (c))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced inner seal by jacking point (6.1.1 (c) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
under side covered in underseal
Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount both (5.3.4 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Rear Inner Vehicle structure modified such that structural rigidity is significantly reduced arch (6.1.1 (d) (i))
Front Brake pipe corroded, covered in grease or other material both (1.1.11 (c))
Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Front Oil leak, but not excessive (8.4.1 (a) (i))
under body corrosion
Nearside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
Offside Front Macpherson strut pin or bush worn but not resulting in excessive movement top mount (5.3.4 (a) (i))
under body corrosion
under body corrosion
Offside Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outter seal middle (6.2.2 (d) (i))
Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting outer seal (6.2.2 (d) (i))
under body corrosion
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Speedometer cannot be illuminated. (6.7.3)
Speedo does not illuminate
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HJ06 MPU is a 2006 Ford Ka in Silver with a 1,299cc petrol engine. This vehicle has been through 26 MOT tests with a personal pass rate of 69.2%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HJ06 MPU, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HJ06 MPU?
You can check the full history of HJ06 MPU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HJ06 MPU registered?
HJ06 MPU is a 2006 Ford Ka, first registered on 1 March 2006.
Is HJ06 MPU safe to buy?
The MOT history for HJ06 MPU shows 26 tests with a 69.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HJ06 MPU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HJ06 MPU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.