2006 Peugeot 107

Nearside Rear brake binding slightly

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement BOTH (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Stop lamp(s) light intensity obviously reduced HIGH LEVEL (4.3.3 (a) (i))

Wiper smeary

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Exhaust emits blue smoke during acceleration (8.2.1.2 (g))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement BOTH SIDES (5.3.4 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Rear Service brake binding but not excessively (1.2.1 (f))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Headlamp has a product on the lens but not seriously reducing light output (4.1.4 (b))

Offside headlight lens slightly deteriorated

Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Service brake excessively binding (1.2.1 (f))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Offside headlight lens slightly deteriorated

Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Central Rear Upper Stop lamp(s) with a multiple light source up to 1/2 not functioning (4.3.1 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front headlight lense deteriorated

Oil leak ()

engine warning light on

Headlamp aim too low (1.8)

Offside Front headlight lense deteriorated

Offside Rear Registration plate lamp not working (1.1.C.1d)

Oil leak ()

engine warning light on

both front headlight lenses deteriorated

damage to nearside front wing bumper split in bumper tapped over

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Front position lamp(s) not working (1.1.A.3b)

both front headlight lenses deteriorated

damage to nearside front wing bumper split in bumper tapped over

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

rear offside tyre outer edge slightly worn

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight damage to offside front tyre sidewall

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

slight damage to offside front tyre sidewall

Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)