2006 Honda Accord

Nearside Front Steering locking device missing Split pin (2.1.3 (d))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Rear Service brake lagging in operation (1.2.1 (d))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill and floor areas (5.3.6 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect Not certain headlamp levelling device is working although activity can be heard on both lamps (4.1.2 (c))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill and floor areas (5.3.6 (a) (i))

Offside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Windscreen washer not working (3.5 (a))

Front Fog lamps defective near side missing off side damaged, not working

Front Power steering pipe/hose has slight seepage (2.1.5 (a))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Items removed from driver's view prior to test ()

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front most (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened Outer face (1.1.14 (a) (ii))

Nearside Rear Nail in tyre ()

Offside Door mirror has tape repair

Offside Drive shaft has play by centre support bearing

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front most (5.3.4 (a) (i))

Offside Rear Corrosion above exhaust outside of prescribed areas

Offside Rear Upper Suspension arm pin or bush worn but not resulting in excessive movement Inner (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement D-BUSHES (5.3.4 (a) (i))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear subframe rear mounting areas corroded thin (5.3.6 (a) (i))

Offside Front Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Offside Rear Bumper insecure (6.1.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear subframe rear mounting area corroded thin (5.3.6 (a) (i))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Central Front Lower Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Front Brake hose has slight corrosion to ferrule x2 n/s and o/s (1.1.12 (f) (i))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Fuel Pipe/s corroded ()

Nearside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced (5.3.3 (b) (i))

Rear Shock absorbers has a reduced damping effect x2 n/s and o/s (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

engine cover sill covers and undertrays fitted obscuring inspection

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Front Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced trailing arm front (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))

Offside Rear Lower Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced trailing arm front (5.3.3 (b) (i))

Rear Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Rear Fuel Pipe/s corroded filler neck ()

Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement x2 d-bushes (5.3.4 (a) (i))

Rear Shock absorbers has a reduced damping effect x2 (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive all mountings (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

engine cover , sill covers and undertrays fitted obscuring inspection

Central Front Integral body structure is corroded but structural rigidity is not significantly reduced crossmember (6.1.1 (c) (i))

Front Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))

Nearside Rear Lower Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced trailing arm front (5.3.3 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))

Offside Rear Lower Suspension arm attachment bracket/mounting corroded but its strength is not seriously reduced trailing arm front (5.3.3 (b) (i))

Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Rear Brake hose has slight corrosion to ferrule x2 (1.1.12 (f) (i))

Rear Fuel Pipe/s corroded filler neck ()

Rear Inner Anti-roll bar pin or bush worn but not resulting in excessive movement x2 d-bushes (5.3.4 (a) (i))

Rear Shock absorbers has a reduced damping effect x2 (5.3.2 (d))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive all mountings (5.3.6 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

engine cover , sill covers and undertrays fitted obscuring inspection

Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Headlamp has a product on the lens so that the light output is severely reduced (4.1.4 (b))

Nearside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill/floor (6.1.1 (c) (i))

Offside Lower Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill/floor (7.1.1 (a) (i))

Front Brake hose has slight corrosion to ferrule x2 n/s & o/s (1.1.12 (f) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front (5.3.4 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill/floor (5.3.6 (a) (i))

Rear Brake hose has slight corrosion to ferrule x2 n/s & o/s (1.1.12 (f) (i))

Rear Fuel Pipe/s corroded filler neck pipe ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Subframe mounting prescribed area is corroded but not considered excessive all mountings (5.3.6 (a) (i))

engine cover and undertrays and o/s sill cover fitted obscuring inspection

Brake pedal wearing smooth (1.1.2 (c))

Engine Covers Fitted Obscuring some Components in the Engine Bay

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front Bush (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Rear Fuel Pipe/s corroded Filler Neck ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Under-Trays Fitted Obscuring some Underside Components

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Rear reflector missing (4.8.2 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Brake pedal wearing smooth (1.1.2 (c))

Engine Covers Fitted Obscuring some Components in the Engine Bay

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement Front Bush (5.3.4 (a) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Oil leak, but not excessive Engine (8.4.1 (a) (i))

Rear Fuel Pipe/s corroded Filler Neck ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Under-Trays Fitted Obscuring some Underside Components

Engine covers fitted obscuring some components in the engine bay

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Fuel Pipe/s corroded Filler Neck ()

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Undertrays fitted obscuring some underside components

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Tyre has ply or cords exposed 205/55/16 91V (5.2.3 (d) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed 205/55/16 91V (5.2.3 (d) (ii)) DANGEROUS

Offside Rear Tyre has ply or cords exposed 205/55/16 91V (5.2.3 (d) (ii)) DANGEROUS

Engine covers fitted obscuring some components in the engine bay

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Upper Suspension arm ball joint has slight play (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Fuel Pipe/s corroded Filler Neck ()

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Undertrays fitted obscuring some underside components

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

corrosion under body

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage insecurely attached (5.3.3 (a) (i))

Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Rear Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

corrosion under body

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Nearside Front Position lamp not working (4.2.1 (a))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement front bush (5.3.4 (a) (i))

Offside Front Position lamp not working (4.2.1 (a))

Offside Rear fog lamp not working (4.5.1 (a) (ii))

Rear Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Windscreen washer not working (3.5 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Outer Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front brake has slight bind

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (2.4.A.3)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Upper Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Supplementary Restraint System warning lamp indicates a fault (5.4.2)

Nearside Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Outer Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front brake has slight bind

Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Rear position lamp(s) has light sources not illuminating, but not more than 50% (1.1.A.3b)

offside rear tyre flat at time of test

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Front Brake pad(s) wearing thin (3.5.1g)

nearside rear brake binding on slightly

tyre size 205/55r16v

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front Upper Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Vehicle's internal headlight adjuster altered to recheck lights

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Headlamp aim too high (1.8)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim too high and too far to the right. (1.8)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Inner Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Inner Rear Tyre worn close to the legal limit (4.1.E.1)