2007 Honda Cbr 125 RW-5

Clutch lever bent (6.2.7 (b))

Drive chain slightly tight (6.1.7 (k) (i))

Front Shock absorber has a light misting of oil o/s n/s (5.3.2 (b))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

leaking oil

no key for fuel cap

Shock absorber has negligible damping effect zero movement (5.3.2 (b))

Rear Valve stem seriously damaged (5.2.3 (j)) DANGEROUS

Clutch lever bent (6.2.7 (b))

Direction indicator with a multiple light source up to 1/2 not functioning front and rear (4.4.1 (a) (i))

Drive chain slightly tight (6.1.7 (k) (i))

Front Shock absorber has a light misting of oil o/s n/s (5.3.2 (b))

Rear Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

leaking oil

no key for fuel cap

Front Shock absorber has a reduced damping effect (5.3.2 (b))

ignition switch missing

n/s front upper fairing loose

o/s mirror missing

slight play in rear cushdrive rubbers

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii)) DANGEROUS

n/s front upper fairing loose

o/s mirror missing

slight play in rear cushdrive rubbers

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

slight play in rear cushdrive rubbers

Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) DANGEROUS

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Tyre worn close to the legal limit (5.2.3 (e))

slight play in rear cushdrive rubbers

Front Brake pad(s) contaminated (1.1.13 (b))

Front Headlamp aim not tested (4.1.2 (b))

Front Headlamp insecure (4.1.1 (c))

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Steering operation restricted in free movement from lock to lock ignition lock loose (2.1.4 (c))

Nearside Front Motorcycle structure joining/attachment plate or fastening insecure fairing panel loose (6.1.1 (b) (i))

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Front wheel bearings are slightly rough (2.3.5b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Headlamp aim too high (1.6)

Offside Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Front Front wheel bearings are slightly rough (2.3.5b)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp aim too high (1.6)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

split in front tyre.

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

split in front tyre.