2013 Peugeot 208

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Play in steering rack inner joint(s)

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

bonnet stay missing

both headlight plastic lens deteriated

travel on handbrake

Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Rear Tyre worn close to legal limit/worn on edge close to legal limit,advise attemtion (5.2.3 (e))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Play in steering rack inner joint(s)

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

bonnet stay missing

both headlight plastic lens deteriated

travel on handbrake

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn to 2.0mm,attention required (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn close to 1.6mm,bald on inner edge,attention requied (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge worn close to 2.0mm,attention required (5.2.3 (e))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

bonnet stay missing

both headlight plastic lens deteriated

travel on handbrake

Central Rear fog lamp lens defective such that emitted light is adversely affected (4.5.1 (b) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Front Tyre has ply or cords exposed attention required (5.2.3 (d) (ii)) DANGEROUS

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge worn to 2.0mm,attention required (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge worn close to 1.6mm,bald on inner edge,attention requied (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge worn close to 2.0mm,attention required (5.2.3 (e))

Oil leak, but not excessive engine (8.4.1 (a) (i))

Rear Exhaust mounting defective (6.1.2 (a))

bonnet stay missing

both headlight plastic lens deteriated

travel on handbrake

Front Bonnet ( inner holder) missing

Front Headlamp has a product on the lens but not seriously reducing light output (o/s & n/s) (4.1.4 (b))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (inner edge badly worn) (5.2.3 (e))

Offside Front Side mirror (outer casing missing)

Rear Exhaust mounting defective (Metal hanger) (6.1.2 (a))

o/s mirror cover missing

surface corrosion rear exhaust,rear axle

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

o/s mirror cover missing

surface corrosion rear exhaust,rear axle

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

o/s mirror cover missing

surface corrosion rear axle

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

o/s mirror cover missing

surface corrosion rear axle

Nearside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Front Exhaust mounting defective (6.1.2 (a))

Rear Exhaust mounting defective (6.1.2 (a))

Front Exhaust mounting defective (6.1.2 (a))

Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Exhaust mounting defective (6.1.2 (a))

ENGINE COVER FITTED

REAR EXHAUST MOUNT ADRIFT

UNDER TRSYS FITTED

REAR EXHAUST BRACKET BROKEN

UNDER TRAYS FITTED