2007 Honda Accord

Central Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis cross member between subframe mountings (6.2.2 (d) (i))

Emissions unable to be completed due to leaks and open pipe/missing silencer (8.2.1.2 (d))

Nearside Front Headlamp aim too low (4.1.2 (a))

Nearside Front Headlamp levelling device inoperative broken (4.1.5 (a))

Nearside Front Lower Suspension arm pin or bush excessively worn front bush pulled out and arm rubbing subframe (5.3.4 (a) (i))

Nearside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Exhaust emissions likely to be affected by an exhaust leak open pipe where second silencer should be fitted (8.2.1.1 (b))

Nearside Rear Headlamp levelling device inoperative broken (4.1.5 (a))

Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))

Offside Front Headlamp aim too low (4.1.2 (a))

Offside Front Lower Suspension arm pin or bush excessively worn front bush pulled out and arm rubbing subframe (5.3.4 (a) (i))

Offside Front Upper Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Central Front Oil leak, but not excessive transmission fluid (8.4.1 (a) (i))

Central Rear Sub-frame is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Exhaust has a minor leak of exhaust gases leak at clamp and rear silencer (6.1.2 (a))

Nearside Front Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Front Headlamp lens slightly defective foggin up (4.1.1 (b) (i))

Nearside Front Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill holed but not within 30cm of any structural component (6.1.1 (c) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Outer panel damaged and taped over

Nearside Rear Suspension arm corroded but not seriously weakened all control arms (5.3.3 (b) (i))

Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Front Headlamp lens slightly defective fogging up (4.1.1 (b) (i))

Offside Front Outer Vehicle structure is corroded but structural rigidity is not significantly reduced sill holed but not within 30cm of any structural component (6.1.1 (c) (i))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Exhaust mounting defective rubber mount split and not connected (6.1.2 (a))

Offside Rear Suspension arm corroded but not seriously weakened all control arms (5.3.3 (b) (i))

Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Front Headlamp aim too low BOTH (4.1.2 (a))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Rear Anti-roll bar linkage fractured (5.3.3 (b) (ii)) DANGEROUS

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar ball joint has slight play (5.3.4 (a) (i))

Nearside Front Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Offside Front Anti-roll bar linkage attachment bracket/mounting fractured (5.3.3 (b) (ii)) DANGEROUS

Front Tyre worn close to the legal limit nearside/offside (4.1.E.1)

Nearside Rear tyre outer wall heavily damaged but cords not showing

Offside Front wiper blade worn but clearing screen

Under-trays fitted obscuring some underside components

Under-trays fitted obscuring some underside components