MOT Status
ExpiredMileage
106,530 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting floor corroded (6.2.2 (d) (i))
Offside Rear Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Rear crossmember either end corroded (6.1.1 (c) (i))
Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS
Front Vehicle structure is corroded but structural rigidity is not significantly reduced Corrosion front of vehicle structure (6.1.1 (c) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill area (6.1.1 (c) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill area (6.1.1 (c) (i))
Central Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill area (6.1.1 (c) (i))
Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced Sill area (6.1.1 (c) (i))
Integral body structure is corroded but structural rigidity is not significantly reduced Both inner and outer sills (6.1.1 (c) (i))
Nearside Front Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Inner Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front strut mounts slight play
o/s rear underside sill slight corroded
Emissions unable to be completed (8.2.2.2 (e))
Exhaust emissions likely to be affected by an induction leak (8.2.1.1 (b))
Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under sides sill (5.3.6 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
both front strut mounts slight play
o/s rear underside sill slight corroded
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Oil leak, but not excessive (8.4.1 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush deteriorated (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush deteriorated (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
oil leak
under side of car corroded
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush deteriorated (5.3.4 (a) (i))
Nearside Front Road wheel slightly distorted (5.2.2 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush deteriorated (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
oil leak
under side of car corroded
Front Brake pad(s) wearing thin (3.5.1g)
Rear exhaust mount/ bracket corroded
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Offside Front Tyre has ply or cords exposed (4.1.D.1b)
both rear tyres cracked & splitting
both rear tyres cracked & splitting
gearbox selector shaft oil leak
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HJ58 YCK is a 2008 Ford Ka in White with a 1,299cc petrol engine. This vehicle has been through 22 MOT tests with a personal pass rate of 63.6%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HJ58 YCK, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HJ58 YCK?
You can check the full history of HJ58 YCK by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HJ58 YCK registered?
HJ58 YCK is a 2008 Ford Ka, first registered on 18 September 2008.
Is HJ58 YCK safe to buy?
The MOT history for HJ58 YCK shows 22 tests with a 63.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HJ58 YCK have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HJ58 YCK. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.