MOT Status
ExpiredMileage
158,460 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Exhaust noisy (8.1.1 (a))
Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Drive shaft damaged but serviceable (6.1.7 (e))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Offside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Offside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear coil spring broken (2.4.C.1a)
Both rear inner wheel arches are suffering with heavy corrosion.
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Front Outer Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Nearside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Offside Front Inner Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Play in steering rack inner joint(s)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Brake load sensing valve seized (3.6.E.3)
Brakes imbalanced across an axle (3.7.B.5b)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Parking brake: efficiency below requirements (3.7.B.7)
Rear rear parking brake recording little or no effort (3.7.B.6a)
Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Brake Load Valve Slightly Seized
Rear Tyre worn close to the legal limit (4.1.E.1)
Parking brake: efficiency below requirements (3.7.B.7)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Rear Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Windscreen wiper blade deteriorated (8.2.2)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Registration plate lamp not working (1.1.5c)
Offside Windscreen wiper blade deteriorated (8.2.2)
Nearside Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Headlamp damaged but light output not reduced (1.7.5a)
Offside Rear Rear position lamp(s) slightly discoloured (1.1.A.3e)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HK52 CVH is a 2002 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 21 MOT tests with a personal pass rate of 71.4%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying HK52 CVH, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HK52 CVH?
You can check the full history of HK52 CVH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HK52 CVH registered?
HK52 CVH is a 2002 Mercedes-benz Vito, first registered on 22 November 2002.
Is HK52 CVH safe to buy?
The MOT history for HK52 CVH shows 21 tests with a 71.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HK52 CVH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HK52 CVH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.