MOT Status
ExpiredMileage
74,521 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Integral body structure is corroded but structural rigidity is not significantly reduced step (6.1.1 (c) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Integral body structure is corroded but structural rigidity is not significantly reduced step (6.1.1 (c) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Rear Integral body structure is corroded but structural rigidity is not significantly reduced rear crossmember (6.1.1 (c) (i))
Reverse lights not working
Brake hose has slight corrosion to ferrule all (1.1.12 (f) (i))
Brake pipe corroded, covered in grease or other material front to rear both lines (1.1.11 (c))
Central Rear Brake load sensing valve stiff (1.1.17 (c) (ii))
Integral body structure is corroded but structural rigidity is not significantly reduced rear section, front sills, base of b pillar (6.1.1 (c) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Rear Service brake requirements only just met. It would appear that the braking system requires adjustment or repair (1.2.1 (c))
All direction indicators not working (4.4.1 (a) (ii))
Horn not working (7.7 (a) (ii))
Nearside Front Brake pipe excessively corroded (1.1.11 (c))
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front jacking point corroded but not within 30cm of structural component
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear cross member corroded but not considered excessive
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Horn not loud enough to be heard by another road user (1.6.2b)
Nearside Front Side repeater not working (1.4.A.2c)
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded inner wing (2.4.A.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Rear Exhaust system not adequately supported (7.1.1)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
1x front exhaust rubber broken but secure
Offside Stop lamp damaged, but still visible from a reasonable distance (1.2.1d)
Brake load sensing valve seized (3.6.E.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Rear position lamp(s) incorrect colour showing white light (1.1.A.3e)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
1x front exhaust rubber broken but secure
Exhaust has a major leak of exhaust gases (7.1.2)
Horn not loud enough to be heard by another road user (1.6.2b)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear coil spring broken (2.4.C.1a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Parking brake lever has little reserve travel (3.1.6b)
Exhaust system not adequately supported (7.1.1)
Horn not working (1.6.2a)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Side repeater incorrect colour (1.4.A.2f)
Offside Rear Direction indicator incorrect colour (1.4.A.2f)
Offside Rear position lamp(s) incorrect colour (1.1.A.3e)
Offside Side repeater incorrect colour (1.4.A.2f)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Windscreen has damage to an area in excess of a 10mm circle within zone 'A' (8.3.1a)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)
Offside Rear Direction indicator damaged, but still visible from a reasonable distance (1.4.A.2e)
Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)
Parking brake lever has little reserve travel (3.1.6b)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Headlamp aim too high (1.8)
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Side repeater incorrect colour (1.4.A.2f)
Rear registration plate delaminated but not likely to be misread (6.3.1d)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Hazard warning lamps not flashing in phase, with ignition off (1.4.B.1f)
Hazard warning lamps not flashing in phase, with ignition on (1.4.B.1f)
Hazard warning tell tale not working correctly (1.4.B.1e)
Nearside Front Brake hose excessively deteriorated (3.6.B.4d)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Windscreen wiper blade insecure (8.2.2)
Offside Front Brake hose excessively deteriorated (3.6.B.4d)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Windscreen wiper blade insecure (8.2.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
all brake discs are quite rusty
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Centre Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Exhaust has part of the system slightly deteriorated (7.1.1a)
OFFSIDE FRONT TYRE CUT IN OUTER WALL
Rear bumper insecure
Spare tyre defective
Front Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Rear brake imbalance 67%
Spare tyre defective
Rear brake imbalance 67%
Spare tyre defective
Nearside Stop lamp not working (1.2.1b)
Offside Obligatory mirror missing (8.1.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HK52 TFY is a 2002 Mercedes-benz Vito in White with a 2,151cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 54.5%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying HK52 TFY, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HK52 TFY?
You can check the full history of HK52 TFY by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HK52 TFY registered?
HK52 TFY is a 2002 Mercedes-benz Vito, first registered on 16 December 2002.
Is HK52 TFY safe to buy?
The MOT history for HK52 TFY shows 22 tests with a 54.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HK52 TFY have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HK52 TFY. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.