MOT Status
ExpiredMileage
83,084 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wing/suspension mounting point (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Offside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Speedometer cannot be illuminated (7.8 (c) (ii))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Front Upper Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Nearside Rear Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced floor (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength front mounting point (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner and outer sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside front and offside front floors (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside rear and offside rear inner and outer sills (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor and outer sill (7.1.1 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing outer edge perishing and inner edge worn (5.2.3 (d) (ii))
Suspension component mounting prescribed area is corroded but not considered excessive nearside front and offside front floors (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside rear and offside rear outer sills (5.3.6 (a) (i))
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive floor and outer sill (7.1.1 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement rear bush (5.3.4 (a) (i))
Offside Front Tyre slightly damaged/cracking or perishing outer edge perishing and inner edge worn (5.2.3 (d) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Suspension component mounting prescribed area is corroded but not considered excessive nearside front and offside front floors (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive nearside rear and offside rear outer sills (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front tyre worn on inner edge.
Suspension component mounting prescribed area is corroded but not considered excessive N/S/F and O/S/F floor corroded. (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive N/S/R and O/S/R sill corroded. (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive O/S/F and N/S/F chassis rails. (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front tyre worn on inner edge.
Suspension component mounting prescribed area is corroded but not considered excessive N/S/F and O/S/F floor corroded. (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive N/S/R and O/S/R sill corroded. (5.3.6 (a) (i))
Suspension component mounting prescribed area is corroded but not considered excessive O/S/F and N/S/F chassis rails. (5.3.6 (a) (i))
Both front wipers slightly worn.
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive chassis and floor (2.4.A.3)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive floor (2.4.A.3)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Surface corrosion on underside of vehicle.
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
O/S/F seat cannot be tilted forward.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Direction indicators incorrect colour (1.4.A.2f)
Nearside Front Headlamp damaged but light output not reduced (1.7.5a)
Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
O/S/F seat cannot be tilted forward.
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement rear (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front coil spring broken (2.4.C.1a)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
o/s/r and n/s/r tyres outer sidewalls perished
Front tyres worn on inner edges.
N/S/R tyre slightly perished.
Nearside Front Road wheel with a slightly distorted bead rim (4.2.A.1a)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HK55 ZTH is a 2006 Ford Ka in Green with a 1,299cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 69.6%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HK55 ZTH, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HK55 ZTH?
You can check the full history of HK55 ZTH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HK55 ZTH registered?
HK55 ZTH is a 2006 Ford Ka, first registered on 31 January 2006.
Is HK55 ZTH safe to buy?
The MOT history for HK55 ZTH shows 23 tests with a 69.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HK55 ZTH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HK55 ZTH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.