MOT Status
ExpiredMileage
191,812 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Brake lever has insufficient reserve travel (1.1.2 (a))
Front Headlamp aim not tested (4.1.2 (b))
Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.3 (a))
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Inner Suspension component mounting prescribed area is inadequately repaired sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount (6.1.1 (c) (i))
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material front to back (1.1.11 (c))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced SEAL, COVERED IN TAPE, FEELS SOLID (6.1.1 (c) (i))
Offside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Service brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced REAR CROSS-MEMBER (6.1.1 (c) (i))
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Nearside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced SEAL, COVERED IN TAPE, FEELS SOLID (6.1.1 (c) (i))
Offside Lower Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced REAR CROSS-MEMBER (6.1.1 (c) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
behind the rear bumper and offside rear seals are been sealed by roof seals
inner and outer seal are sealed of by roof sealed
Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle 46% (1.2.1 (b) (i))
Central Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Oil leak, but not excessive (8.4.1 (a) (i))
behind the rear bumper and offside rear seals are been sealed by roof seals
inner and outer seal are sealed of by roof sealed
Parking brake efficiency below requirements (1.4.2 (a) (i))
Exhaust mounting defective (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced corrosion several points around vehicle body (6.1.1 (c) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside inner and outer sill covered in tape unable to fully inspect
Offside Rear Nail in tyre ()
Offside Windscreen wiper blade defective (3.4 (b) (i))
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Nearside Front Service brake excessively fluctuating (1.2.1 (e))
Nearside Rear Position lamp not working (4.2.1 (a))
Nearside Side repeater incorrect colour (4.4.3 (a))
Offside Front Service brake excessively fluctuating (1.2.1 (e))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
Exhaust mounting defective (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Integral body structure is corroded but structural rigidity is not significantly reduced corrosion several points around vehicle body (6.1.1 (c) (i))
Nearside Front Child Seat fitted not allowing full inspection of adult belt ()
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside inner and outer sill covered in tape unable to fully inspect
Offside Rear Nail in tyre ()
Offside Windscreen wiper blade defective (3.4 (b) (i))
Vehicles internal headlight adjuster altered to recheck lights ()
Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))
Brake fluid warning lamp inoperative (3.6.G.2)
Nearside Front Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Inner Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded inner sill / outrigger (5.2.6)
Nearside Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Headlamp adversely affected by the operation of another lamp (1.7.5c)
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Headlamp insecure (1.7.3)
Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Obligatory mirror insecure (8.1.1)
Offside Stop lamp not working (1.2.1b)
Offside Upper Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Exhaust system not adequately supported (7.1.1)
Nearside Registration plate lamp not fitted (1.1.C.1b)
Nearside Stop lamp not working (1.2.1b)
Offside Registration plate lamp not fitted (1.1.C.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Steering column shaft has excessive end float (2.1.3)
Nearside Rear Brake hose excessively deteriorated (3.6.B.4d)
Nearside rear parking brake recording little or no effort (3.7.B.6a)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust noisy (7.1.4)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear reflector slightly damaged but function not impaired (1.5.1c)
Steering column top bearing slightly worn (2.1.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
exhaust manifold/front pipe bolt missing
speedometer does not zero when vehicle is stationary, but does work.
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Rear Tyre has ply or cords exposed (4.1.D.1b)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Parking brake lever has no reserve travel (3.1.6b)
Parking brake: efficiency below requirements (3.7.B.7)
Speedometer clearly inoperative (6.7.2)
Exhaust has a minor leak of exhaust gases (7.1.2)
Exhaust noisy (7.1.4)
Nearside Headlamp aim too high (1.8)
Nearside Rear Brake hose slightly deteriorated (3.6.B.4d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Rear Shock absorber has a light misting of oil (2.7.3)
Offside Rear reflector slightly damaged but function not impaired (1.5.1c)
Steering column top bearing slightly worn (2.1.2c)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
exhaust manifold/front pipe bolt missing
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Headlamp aim too high (1.8)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Steering column top bearing slightly worn (2.1.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside driveshaft inner joint gaiter deteriorating
offside driveshaft inner joint gaiter deteriorating
Offside Rear Rear position lamp(s) not working (1.1.A.3b)
Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Steering column top bearing slightly worn (2.1.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
nearside driveshaft inner joint gaiter deteriorating
offside driveshaft inner joint gaiter deteriorating
Nearside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside wiper rubber deteriorating
Offside Inner Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside wiper rubber deteriorating
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Rear No.plate deteriorating
Nearside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Brake hose slightly deteriorated (3.6.B.4d)
Parking brake lever requires adjustment
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Offside Rear Rear position lamp(s) incomplete (1.1.4a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Mercedes-benz Vito?
Based on 2,011,702 MOT tests across 164,434 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HN02 BFP is a 2002 Mercedes-benz Vito in Black with a 2,151cc diesel engine. This vehicle has been through 27 MOT tests with a personal pass rate of 55.6%.
Across all 2002 Mercedes-benz Vito models, the average MOT pass rate is 65.4% with a typical mileage of 110,245 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mercedes-benz Vito fails its MOT is parking brake: efficiency below requirements, accounting for 49,564 recorded failures. If you're considering buying HN02 BFP, it's worth having these areas checked by a mechanic before committing.
The Mercedes-benz Vito typically stays on UK roads for around 29 years. At 24 years old, this Mercedes-benz Vito is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HN02 BFP?
You can check the full history of HN02 BFP by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HN02 BFP registered?
HN02 BFP is a 2002 Mercedes-benz Vito, first registered on 11 April 2002.
Is HN02 BFP safe to buy?
The MOT history for HN02 BFP shows 27 tests with a 55.6% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HN02 BFP have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HN02 BFP. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.