MOT Status
ExpiredMileage
112,050 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive slight corrosion in engine bay also within 30cm of engine mount (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Suspension arm damaged and seriously weakened trailing arm (5.3.3 (b) (i))
Brake fluid warning lamp illuminated (1.1.10 (f))
Nearside Front Service brake binding but not excessively (1.2.1 (f))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Rear Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive slight corrosion in engine bay also within 30cm of engine mount (5.3.6 (a) (i))
Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Rear Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))
Electronic stability control warning lamp indicates a fault (7.12 (e))
Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))
Offside Front Service brake excessively binding (1.2.1 (f))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick x2 (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake disc in such a condition that it is seriously weakened (1.1.14 (a) (ii)) DANGEROUS
Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
engine light on
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Electronic stability system warning lamp indicates a fault (3.4.1c)
Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Tyre tread depth below requirements of 1.6mm inside edge (4.1.E.1)
Offside front brake binding (3.7.B.1)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Tyre worn close to the legal limit inside edge (4.1.E.1)
engine light on
Nearside Front Tyre worn close to the legal limit inside edge (4.1.E.1)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
engine light on
Nearside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Anti-roll bar rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Headlamp not working on dipped beam (1.7.5a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
both rear brake discs slightly pitted
Nearside Front Tyre not fitted in accordance with side wall instructions (4.1.D.1f)
Nearside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
Nearside Seat belt anchorage prescribed area is distorted but not considered excessive (5.2.6)
How Reliable is the Mazda 626?
Based on 311,592 MOT tests across 41,549 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HN02 UBG is a 2002 Mazda 626 in Green with a 1,991cc petrol engine. This vehicle has been through 20 MOT tests with a personal pass rate of 65%.
Across all 2002 Mazda 626 models, the average MOT pass rate is 72.9% with a typical mileage of 74,022 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 626 fails its MOT is parking brake: efficiency below requirements, accounting for 25,332 recorded failures. If you're considering buying HN02 UBG, it's worth having these areas checked by a mechanic before committing.
The Mazda 626 typically stays on UK roads for around 37 years. At 24 years old, this Mazda 626 is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HN02 UBG?
You can check the full history of HN02 UBG by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HN02 UBG registered?
HN02 UBG is a 2002 Mazda 626, first registered on 30 May 2002.
Is HN02 UBG safe to buy?
The MOT history for HN02 UBG shows 20 tests with a 65% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HN02 UBG have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HN02 UBG. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.