2003 Land Rover Discovery

Fuel Pipe/s corroded ()

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Fuel Pipe/s corroded ()

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Rear Child Seat fitted not allowing full inspection of adult belt ()

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front diff has slight leak

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Front Service brake grabbing slightly (1.2.1 (c))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-roll bar linkage ball joint has slight play nsr and osr (5.3.4 (a) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced os and ns chassis front to rear (6.1.1 (c) (i))

Integral body structure is corroded but structural rigidity is not significantly reduced osf inner wing (6.1.1 (c) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Suspension arm pin or bush worn but not resulting in excessive movement nsr and osr trailing arm bushes (5.3.4 (a) (i))

osr outer diff seal weaping

Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement nsr and osr trailing arm bushes (5.3.4 (a) (i))

Headlamp light source and lamp not compatible nsf and osf (4.1.4 (c))

Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting nsr chassis (6.2.2 (d) (i))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Windscreen wiper blade defective (3.4 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Suspension arm pin or bush worn but not resulting in excessive movement nsr and osr trailing arm bushes (5.3.4 (a) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement trailing arm (5.3.4 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security chassis front to rear (6.2.2 (d) (i))

Nearside & offside Front inner wheel archs/wings corroded

Offside Rear axle seal leaking

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front inner wheel arch corroded

Offside Rear axle seal leaking

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength shocker mount (5.3.6 (a) (i))

Nearside Front inner wheel arch corroded

Offside Rear axle seal leaking

Oil leak, but not excessive (8.4.1 (a) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front half shaft seal leaking

chassis corroded

Nearside Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front half shaft seal leaking

chassis corroded

Offside Front half shaft seal leaking

chassis corroded

Fuel system component leaking on engine (7.2.3)

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Front half shaft seal leaking

chassis corroded

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Front Brake pipe slightly corroded (3.6.B.2c)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe excessively corroded (3.6.B.2c)

Front Lower Shock absorber has a slightly worn bush (2.7.4)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both rear tyres worn uneven

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Headlamp not working on dipped beam (1.7.5a)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

both rear tyres worn uneven

Front Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone 'A' (8.3.1b)