2003 Mazda B Series

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Exhaust emits excessive smoke or vapour but not likely to obscure the vision of other road users (8.2.2.2 (c))

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Front Brakes imbalanced across an axle Axle 1 (1.2.1 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Service brake excessively binding (1.2.1 (f))

Brake load sensing valve missing where fitted as standard (1.1.17 (d)) DANGEROUS

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Outer Vehicle structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Fuel cap/sealing device missing (6.1.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Rear Outer Vehicle structure is deformed but structural rigidity is not significantly reduced sill (6.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Brake pipe corroded, covered in grease or other material front to rear, both (1.1.11 (c))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

general underbody surface corrosion

Nearside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Anti-roll bar rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Shock absorber has a slightly worn bush (2.7.4)

Front Brake pad(s) wearing thin (3.5.1g)

Rear bumper damaged

Centre Exhaust system not adequately supported (7.1.1)

Both front tyres edging off

Both wiper blades deteriating

Slight drag on right front brake

Nearside Front Windscreen wiper blade deteriorated (8.2.2)