2004 Mercedes-benz Vito

Front Oil leak, but not excessive (8.4.1 (a) (i))

Offside Front Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Central Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))

Central Exhaust silencer insecure (8.1.1 (b) (i))

Central Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Central Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Front Windscreen washer provides insufficient washer liquid (3.5 (a))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))

Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe inadequately clipped or supported (1.1.11 (d) (i))

Offside Front Steering rack has slight free play detected at steering wheel (2.3 (a) (i))

Front Coolant leak water pump leak ()

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Brake pipe excessively corroded (1.1.11 (c))

Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Hydraulic brake calliper leaking (1.1.16 (b) (i))

Nearside Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))

Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Front Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Front coil spring broken (2.4.C.1a)

Nearside Rear Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Stop lamp not working (1.2.1b)

Nearside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Brake pipe excessively corroded by fuel tank (3.6.B.2c)

Offside Rear Brake pipe inadequately supported (3.6.B.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Headlamp not working on dipped beam (1.7.5a)

Offside Registration plate lamp not working (1.1.C.1d)

Parking brake: efficiency below requirements (3.7.B.7)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Exhaust has a part missing (7.1.1a)

Offside Rear coil spring incomplete (2.4.C.1a)

Nearside Rear Brake pad(s) wearing thin (3.5.1g)

Offside Rear Brake pad(s) wearing thin (3.5.1g)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)