MOT Status
ExpiredMileage
79,724 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Headlamp lens slightly defective (4.1.1 (b) (i))
Integral body structure is fractured but structural rigidity is not significantly reduced full filler cap/ body panel (6.1.1 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))
Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear off vehicle heavily corroded
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))
Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Nearside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced arch (6.1.1 (c) (i))
Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i))
Offside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Integral body structure is fractured but structural rigidity is not significantly reduced full filler cap/ body panel (6.1.1 (a) (i))
Nearside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced arch (6.1.1 (c) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced floor pan (6.1.1 (c) (i))
Offside Front Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear off vehicle heavily corroded
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill and inner arch (6.2.2 (d) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Nearside Front Headlamp aim too low (4.1.2 (a))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))
Nearside Front Brake disc worn, but not excessively (1.1.14 (a) (i))
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Integral body structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security outer sill and inner arch (6.2.2 (d) (i))
Offside Front Integral body structure is corroded but structural rigidity is not significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Integral body structure is corroded but structural rigidity is not significantly reduced inner arch (6.1.1 (c) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))
Nearside Rear Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner sill holed/corroded (5.3.6 (a) (i))
Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement lower arm rear bush (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge tyre inner edge very low (5.2.3 (e))
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded floor to sill section (5.2.6)
Registration plate lamp not working (1.1.C.1d)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Slight corrosion on underside
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
some corrosion starting
Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Stop lamp not working (1.2.1b)
some corrosion starting
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Under-trays fitted obscuring some underside components
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HN08 YUF is a 2008 Ford Ka in Green with a 1,297cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 65.2%.
Across all 2008 Ford Ka models, the average MOT pass rate is 71.0% with a typical mileage of 41,756 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HN08 YUF, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 18 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HN08 YUF?
You can check the full history of HN08 YUF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HN08 YUF registered?
HN08 YUF is a 2008 Ford Ka, first registered on 24 May 2008.
Is HN08 YUF safe to buy?
The MOT history for HN08 YUF shows 23 tests with a 65.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HN08 YUF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HN08 YUF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.