2008 Ford Ka

Front Exhaust has a major leak of exhaust gases FLEXY SECTION (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength FLOOR (5.3.6 (a) (i))

Nearside Rear Brake prescribed area is excessively corroded CHASSIS (1.1.21 (e) (i))

Nearside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced STEP/SILL (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i))

Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced FLOOR X 2 (7.1.1 (a) (i))

Nearside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength CHASSIS RAIL (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength FUEL FILLER NECK AREA (5.3.6 (a) (i))

Offside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength WHEEL ARCH (5.3.6 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced SILL (7.1.1 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength WHEEL ARCH X 3 (5.3.6 (a) (i))

Offside Rear Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

ALL EXHAUST HANGER RUBBERS WEAK

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive SHOCK MOUNTING (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area is corroded but not considered excessive WHEEL ARCH/ 1/4 PANEL (5.3.6 (a) (i))

Offside Front BUMPER CORNER DAMAGED

Offside Front Seat belt anchorage prescribed area is corroded but not considered excessive FLOOR (7.1.1 (a) (i))

Offside Headlamp aim too low (4.1.2 (a))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive SHOCK MOUNTING (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area is corroded but not considered excessive CENTRAL FLOOR (7.1.1 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Headlamp lens slightly defective WATER INGRESS (4.1.1 (b) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive WING AROUND FUEL FILLER (7.1.1 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced CHASSIS RAIL (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened SURFACE CORRODED (1.1.14 (a) (ii))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Emissions not tested EXHAUST MISSING (8.2.1.2 (d))

Exhaust has a major leak of exhaust gases MISSING (6.1.2 (a))

Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced CENTRE SILL (7.1.1 (a) (i))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CHASSIS RAIL (6.1.1 (c) (i))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Headlamp aim too low (4.1.2 (a))

Nearside Headlamp lens slightly defective WATER INGRESS (4.1.1 (b) (i))

Nearside Rear Seat belt anchorage prescribed area is corroded but not considered excessive WING AROUND FUEL FILLER (7.1.1 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced CHASSIS RAIL (6.1.1 (c) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened SURFACE CORRODED (1.1.14 (a) (ii))

Offside Headlamp aim too high (4.1.2 (a))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL (5.3.6 (a) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Emissions not tested major exhaust leak (8.2.1.2 (d))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside / offside subframe mounting (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive outer sill (7.1.1 (a) (i))

Offside Front Nail in tyre ()

Offside Rear Tyre worn close to legal limit/worn on edge limit on inner edge (5.2.3 (e))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside / offside axle mounting (5.3.6 (a) (i))

corrosion to nearside / offside inner wings

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside / offside subframe mounting (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside / offside axle mounting (5.3.6 (a) (i))

coolant level low

slight engine oil leak

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))

Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Offside Rear Bumper insecure bumper mounting also rear valence (6.1.4 (a) (i))

Front Suspension component mounting prescribed area is corroded but not considered excessive nearside / offside subframe mounting (5.3.6 (a) (i))

Items removed from driver's view prior to test ()

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Suspension component mounting prescribed area is corroded but not considered excessive nearside / offside axle mounting (5.3.6 (a) (i))

coolant level low

slight engine oil leak

off side front tyre wearing on inner shoulder

Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)

Offside Front coil spring broken (2.4.C.1a)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

off side front tyre wearing on inner shoulder

Front Tie bar/rod has slight play in a pin/bush (2.4.G.2)

Rear Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)