MOT Status
ValidMileage
151,294 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Rear Anti-roll bar linkage ball joint has slight play N/S & O/S (5.3.4 (a) (i))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Tyre worn close to legal limit/worn on edge All Four (5.2.3 (e))
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Offside Rear Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Anti-roll bar linkage ball joint has slight play N/S & O/S (5.3.4 (a) (i))
Steering rack has slight free play detected at steering wheel (2.3 (a) (i))
Tyre worn close to legal limit/worn on edge All Four (5.2.3 (e))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Nearside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Nearside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Coil spring corroded both side (5.3.1 (b) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Suspension arm pin or bush worn but not resulting in excessive movement both side (5.3.4 (a) (i))
Nearside Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Rear Coil spring corroded both side (5.3.1 (b) (i))
Rear Suspension spring mounting prescribed area is corroded but not considered excessive both side (5.3.6 (a) (i))
Nearside Parking brake inoperative on one side Zero effort. (1.4.1 (a))
Nearside Rear Rear fog lamp does not emit a steady red light Fog lamp lense damaged. (4.5.4 (a))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Parking brake inoperative on one side Very poor effort. (1.4.1 (a))
Rear fog lamp not working (4.5.1 (a) (ii))
Windscreen washer provides insufficient washer liquid (3.5 (a))
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS
items removed from view prior to test.
possible adjustment required on near side rear park brake shoes
Nearside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
items removed from view prior to test.
possible adjustment required on near side rear park brake shoes
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Nearside Rear Tyre not fitted in accordance with side wall instructions (5.2.3 (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Brake pad(s) wearing thin both (1.1.13 (a) (ii))
Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Nearside Stop lamp(s) all not working (4.3.1 (a) (iii))
Nearside Stop lamp not working (1.2.1b)
Offside Front position lamp(s) not working (1.1.A.3b)
Centre Front Items removed from driver's view prior to test ()
Offside Rear Registration plate lamp insecure (1.1.C.1c)
Centre Front Items removed from driver's view prior to test ()
Front Brake pad(s) wearing thin (3.5.1g)
Rear Brake pad(s) wearing thin (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
How Reliable is the Kia Proceed?
Based on 33,460 MOT tests across 2,419 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HN10 VBO is a 2010 Kia Proceed in Black with a 1,591cc petrol engine. This vehicle has been through 23 MOT tests with a personal pass rate of 56.5%.
Across all 2010 Kia Proceed models, the average MOT pass rate is 71.5% with a typical mileage of 67,540 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Kia Proceed fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 555 recorded failures. If you're considering buying HN10 VBO, it's worth having these areas checked by a mechanic before committing.
The Kia Proceed typically stays on UK roads for around 18 years. At 16 years old, this Kia Proceed is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HN10 VBO?
You can check the full history of HN10 VBO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HN10 VBO registered?
HN10 VBO is a 2010 Kia Proceed, first registered on 13 July 2010.
Is HN10 VBO safe to buy?
The MOT history for HN10 VBO shows 23 tests with a 56.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HN10 VBO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HN10 VBO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.