2003 Mercedes-benz Vito

Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength front inner wheel arch / body mount area (5.3.6 (a) (i))

Nearside Parking brake inoperative on one side (1.4.1 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch /body mount area (5.3.6 (a) (i))

Offside Parking brake inoperative on one side (1.4.1 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i))

Offside Track rod end ball joint has excessive play (2.1.3 (b) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

offside and nearside rear valance areas corroded but not within 30cm of anything

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Non obligatory mirror damaged ()

Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength x 2 holes next to wishbone mounting (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner and outer sill (7.1.1 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Obligatory mirror slightly damaged (3.3 (b) (i))

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

corrosion both outer and inner sills/corrosion rear chassis flacking

travel on handbrake

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

corrosion both outer and inner sills/corrosion rear chassis flaking

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Outer Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Front brake disc worn, pitted or scored, but not seriously weakened both (3.5.1i)

Nearside Front Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

corrosion both outer and inner sills/corrosion rear chassis flaking

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Chassis starting to show heavy corrosion flaking.

Front Exhaust has a minor leak of exhaust gases pipe joint to centre exhaust. (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Front tyre wearing on inner edge.

Offside Side repeater slightly discoloured (1.4.A.2f)

Offside Front Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Headlamp not working on dipped beam (1.7.5a)

Chassis starting to show heavy corrosion flaking.

Front Exhaust has a minor leak of exhaust gases pipe joint to centre exhaust. (7.1.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Front tyre wearing on inner edge.

Offside Side repeater slightly discoloured (1.4.A.2f)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Headlamp damaged but light output not reduced (1.7.5a)

Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)