2004 Ford Focus C-max

Front Oil leak ()

Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a)

Offside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)

Front Oil leak ()

Nearside Front Front suspension ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Oil leak

Nearside Front Headlamp insecure (1.7.3)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Front Windscreen wiper blade insecure (8.2.2)

Offside Front Headlamp insecure (1.7.3)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Oil leak

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

childs seats fitted

Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b)

Headlamp aim beam image obviously incorrect BOTH (1.8.A.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

childs seats fitted

Front Brake pad(s) wearing thin (3.5.1g)

Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Inner Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear wheel bearing rough when rotated (2.6.1)

rear coil springs corroding in cups

rear exhaust heatshield loose fitting

there is a noise from the engine indicating compression loss at injector requiring attention

Both front lower susp/arms rear bushes getting abit perrished and split, and slight movement starting

N/S/R tyre almost ON limits of tread wear

N/S/R tyre getting abit scuffed and slight bulge starting at Outer sidewall area

Rear Inner b/pads appear abit low

Small cracks at screen

Washer bottle cap missing

both front tyres low on tread and near limits of wear

Slight bulge and perrishing starting at N/S/R tyre outer sidewall

Front suspension wish bones rear mounting bushes start of seperating.

Rear brake pads appear low on friction material.

Road wheels tyres show sear at inner edges.

B/Fluid level appears to be getting abit low at reservoir

Rear inner b/pads appear abit low and front b/pads starting to get abit worn slightly