2010 Renault Clio

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Exhaust emissions exceed level of metered smoke for a non-turbo charged engine (8.2.2.2 (b))

Central Rear Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Central Stop lamp(s) non-obligatory stop lamp not working (4.3.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Offside Front Tyre worn close to legal limit/worn on edge tyre worn smooth on inside edge (5.2.3 (e))

Rear Exhaust mounting defective rubber broken (6.1.2 (a))

clutch pipe damper valve is leaking

Front Registration plate does not conform to the specified requirements backing is deteriorated (0.1 (d))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Front Coil spring fractured or broken broken (5.3.1 (b) (i))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Track rod end ball joint worn to the extent there is a serious risk of detachment (2.1.3 (b) (ii)) DANGEROUS

Offside Front Tyre worn close to legal limit/worn on edge tyre worn smooth on inside edge (5.2.3 (e))

Offside Front scuttle drain is blocked

Rear Exhaust mounting defective rubber broken (6.1.2 (a))

clutch pipe damper valve is leaking

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Lower Suspension spring mounting prescribed area is corroded but not considered excessive both spring cups are corroded (5.3.6 (a) (i))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Obligatory mirror slightly damaged inside mirror (3.3 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Nearside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front support brace bar corroded to such an extent that rigidity compromised (5.3.6 (a) (i))

Front Inner Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Lower Suspension spring mounting prescribed area is corroded but not considered excessive both spring cups are corroded (5.3.6 (a) (i))

Nearside Rear Outer Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Obligatory mirror slightly damaged inside mirror (3.3 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Offside parking brake effort is low

Offside scuttle drain is blocked

Rear Exhaust mounting defective broken (6.1.2 (a))

coolant rad support panel is corroded and holed

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Offside parking brake effort is low

Offside scuttle drain is blocked

Rear Exhaust mounting defective broken (6.1.2 (a))

coolant rad support panel is corroded and holed

Offside Front Tyre slightly damaged outer sidewall (5.2.3 (d) (ii))

Parking brake lever defective but can be satisfactorily operated long travel (1.1.6 (d))

Nearside Front TYRE HEAVY OUTER WEAR/underinflated

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Tyre worn close to the legal limit worn outer edge 3/4 rule (4.1.E.1)

front brake fluctuating, but not excessively (3.7.B.3)

plastic trims shields and guards covering some prescribed areas

Brake pad(s) wearing thin Both front (3.5.1g)

Tyre worn close to the legal limit Both front bold inner and outer edge centre 3/4 on limmit (4.1.E.1)

Tyre worn close to the legal limit Both rear (4.1.E.1)

Nearside Rear Stop lamp not working (1.2.1b)

Nearside coil spring broken Front (2.4.C.1a)

Registration plate lamp not working (1.1.C.1d)

Brake pad(s) wearing thin Both front (3.5.1g)

Tyre worn close to the legal limit Both front bold inner and outer edge centre 3/4 on limmit (4.1.E.1)

Tyre worn close to the legal limit Both rear (4.1.E.1)

Items removed from driver's view prior to test

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Items removed from driver's view prior to test

Engine covers fitted obscuring some components in the engine bay

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Under-trays fitted obscuring some underside components