2016 Lexmoto Venom

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Horn sound not in accordance with requirements (7.7 (c))

Rear All position lamps not working (4.2.1 (a))

Rear Pillion seat with a defective supporting structure (6.2.6 (a) (i))

DRIVE CHAIN EXCESSIVELY LOOSE

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front FORK SEALS LEAKING

Front FRONT MUD GUARD CRACKED AND HAS A FITTING MISSING BUT SECURE

Rear REAR TAILLIGHT NOT WORKING

Horn sound not in accordance with requirements (7.7 (c))

Rear Pillion seat with a defective supporting structure (6.2.6 (a) (i))

DRIVE CHAIN EXCESSIVELY LOOSE

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front FORK SEALS LEAKING

Front FRONT MUD GUARD CRACKED AND HAS A FITTING MISSING BUT SECURE

Rear REAR TAILLIGHT NOT WORKING

Front mudguard cracked and has a fitting missing but secure

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement swing arm bushes (5.3.4 (a) (i))

Rear Wheel alignment slightly misaligned handlebars slightly to left (2.4 (a))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Drive chain excessively loose (6.1.7 (c) (i))

Headlamp aim too low (4.1.2 (a))

Front mudguard cracked and has a fitting missing but secure

Rear Suspension arm pin, bush or joint worn but not resulting in excessive movement swing arm bushes (5.3.4 (a) (i))

Rear Wheel alignment slightly misaligned handlebars slightly to left (2.4 (a))

Registration plate lamp throwing direct white light to the rear (4.7.1 (a))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Gear lever bent in. Speedo insecure.

Shock absorber has a slightly worn bush Slight up and down play in top shock bush (5.3.2 (c))

Drive chain excessively loose (6.1.7 (c) (i))

Front Position lamp not working (4.2.1 (a))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp not working on main beam Intermittent (4.1.1 (a) (ii))

Horn not working (7.7 (a))

Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Rear reflector missing (4.8.2 (a) (ii))

Registration plate does not conform to the specified requirements Too small (0.1 (d))

Throttle operating incorrectly Too much free play (6.2.7 (a) (i))

Wheel alignment incorrect which adversely affects the steering Handlebars to left when front wheel straight. Offside front fork leg bent back. (2.4 (a))

Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Clutch lever bent (6.2.7 (b))

Exhaust noisy (8.1.1 (a))

Gear lever bent in

Shock absorber has a slightly worn bush Slight up and down play in top shock bush. (5.3.2 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Rear Nail in tyre

headlamp aim slightly low

Drive chain worn to excess (6.1.7 (c) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp reflector seriously defective (4.1.1 (b) (ii))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Nail in tyre

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Position lamp not working (4.2.1 (a))

Front Stop lamp not working (4.3.1 (a) (ii))