MOT Status
ExpiredMileage
218,280 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar linkage ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))
Offside Headlamp aim unable to be tested (4.1.2 (b))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
corrosion to nearside and offside inner and outer sills
Exhaust emissions test not completed because smoke levels are significantly in excess of the specified limit values (8.2.2.2 (f))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Service brake excessively binding (1.2.1 (f))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Offside Front Play in steering rack inner joint(s) ()
Rear Exhaust mounting defective hanger broken (6.1.2 (a))
corrosion n/s o/s under sills and o/s outer sill
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Nearside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge worn on inner edge (5.2.3 (e))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outrigger (6.1.6 (i) (i))
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting outrigger (6.1.6 (i) (i))
Rear fog lamp not working (4.5.1 (a) (ii))
Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))
Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Tyre worn close to legal limit/worn on edge worn inner edge (5.2.3 (e))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner and outer sill (5.3.6 (a) (i))
Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))
Offside Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
corrosion both front inner sills not within any prescribe area
eml light on dash
Both outer headlight lenses in poor condition
Items removed from driver's view prior to test from mirror ()
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Rear fog lamp not working (1.3.2b)
both rear tyres tread low and cuts
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Registration plate lamp not working (1.1.C.1d)
Rear fog lamp not working (1.3.2b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
front brake discs slightly scored.pass and advice.
Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
both headlamps have a stepped diagonal image.
brake disc slightly pitted (3.5.1h)
Nearside Headlamp aim too low and too far to the left. (1.8)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Brake pad(s) wearing thin (3.5.1g)
Nearside Front constant velocity joint gaiter deteriorated (2.5.C.1a)
both headlamps have a stepped diagonal image.
brake disc slightly pitted (3.5.1h)
How Reliable is the Mazda Bongo?
Based on 251,584 MOT tests across 14,362 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HS02 UWX is a 2010 Mazda Bongo in Silver with a 2,490cc diesel engine. This vehicle has been through 26 MOT tests with a personal pass rate of 61.5%.
Across all 2010 Mazda Bongo models, the average MOT pass rate is 66.7% with a typical mileage of 135,155 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Bongo fails its MOT is fog lamp not working, accounting for 6,854 recorded failures. If you're considering buying HS02 UWX, it's worth having these areas checked by a mechanic before committing.
The Mazda Bongo typically stays on UK roads for around 31 years. At 16 years old, this Mazda Bongo is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HS02 UWX?
You can check the full history of HS02 UWX by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HS02 UWX registered?
HS02 UWX is a 2010 Mazda Bongo, first registered on 1 March 2010.
Is HS02 UWX safe to buy?
The MOT history for HS02 UWX shows 26 tests with a 61.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HS02 UWX have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HS02 UWX. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.