2004 Ford Focus C-max

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Smoke ,during acceleration

Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g))

Front Headlamp lens seriously defective both side (4.1.1 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Smoke ,during acceleration

Central Front Parking brake lever is not capable of being maintained in operation by direct mechanical action only ratchet not holding (1.1.6 (f))

Front Position lamp not working on both sides (4.2.1 (a))

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

outer sills damaged

Exhaust shield missing where fitted as original equipment creating a risk of fire fuel tank shield (6.1.3 (e)) DANGEROUS

Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Rear Exhaust mounting defective (6.1.2 (a))

Rear Service brake fluctuating, but not excessively (1.2.1 (e))

outer sills damaged

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

offside rear road spring corroding

rear brake discs corroding

rear brake fluctuating, but not excessively both (3.7.B.3)

rear exhaust mount corroded/detatched

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

offside rear road spring corroding

rear brake discs corroding

rear brake fluctuating, but not excessively both (3.7.B.3)

rear exhaust mount corroded/detatched

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front lower suspension arm inner bushes perishing

headlamp beam images deteriorating

rear heat shield loose

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

front lower suspension arm inner bushes perishing

headlamp beam images deteriorating

rear heat shield loose

front lower suspension arm inner bushes perishing.

offside rear road spring corroding.

rear brake discs corroding/pitting.

rear exhaust mount detatched.

front lower suspension arm inner bushes perishing.

headlamp beam images deteriorating.

rear brake discs corroding on inner friction surface.

rear exhaust mounts corroded.

slight movement offside rear antiroll bar link.

both outer sills damaged.

front lower suspension arm inner bushes perishing.

headlamp beam images deteriorating.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.C.1d)

both outer sills damaged.

front brake discs corroding/pitting on inner friction surface.

front brake pads on wear limit.

front lower suspension arm inner bushes perishing.

headlamp beam images deteriorating.

front lower suspension arm inner bushes perishing.

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

front lower suspension arm inner bushes perishing.

front lower suspension arm inner bushes starting to perish.

nearside front tyre close to wear limit.

offside front tyre wearing out on inner edge only passes due to raised tread pattern.

wiper blades starting to smear screen.

inner set of front and rear brake pads getting thin.

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp aim not tested (1.8.A.1c)

Offside Headlamp not working on dipped beam (1.7.5a)

inner set of front and rear brake pads getting thin.

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Registration plate lamp not working (1.1.5c)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Registration plate lamp not working (1.1.5c)