1996 Nissan Micra

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Front Windscreen wiper not operating automatically when switched on (8.2.1b)

Nearside Registration plate lamp not working (1.1.C.1d)

Offside Front Front suspension locking device missing (2.5.A.4)

Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Nearside Driver's door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Nearside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Nearside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Front Anti-roll bar linkage rubber mounting deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm has slight play in a ball joint (2.4.G.2)

Offside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

Offside Rear Brake pipe slightly corroded (3.6.B.2c)

corrosion on front cross member and weld repairs to cross member too

weld repairs to sills

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Driver's door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Nearside Headlamp aim too low (1.8)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Front Brake pad(s) wearing thin (3.5.1g)

Nearside Front passenger door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

Offside Driver's door hinge deteriorated but the door can still be readily opened and closed (6.2.B.2)

both front door hinge pins worn

Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Nearside Headlamp aim too low (1.8)

Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Headlamp aim too high (1.8)

Upper Stop lamp not working (1.2.1b)

both front door hinge pins worn

Front Brake pad(s) wearing thin (3.5.1g)

o/s lower ball joint dust cover split, this may not pass future mot's

Front Lower Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Front Tyre(s) incorrect because different size tyres are fitted on the same axle. (4.1.A.1a)

Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Headlamp aim too high (1.8)

Front Brake pad(s) wearing thin (3.5.1g)

o/s lower ball joint dust cover split, this may not pass future mot's

Front valance corroding

Offside Headlamp not in good working order adversely affecting beam image (1.2.4a)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Tyre worn close to the legal limit (4.1.E.1)

Front Direction indicators incorrect colour (1.4.A.2f)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Shock absorber has an excessively worn shock absorber pivot (2.7.4)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Tyre worn close to the legal limit (4.1.E.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Tyre worn close to the legal limit (4.1.E.1)

Centre Stop lamp not working (1.2.1b)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Headlamp not working on dipped beam (1.7.5a)

Registration plate lamp not working (1.1.5c)

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)