1997 Ford Mondeo

Front Brake disc worn, pitted or scored, but not seriously weakened offside and nearside (1.1.14 (a) (ii))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

o/s f suspension arm front bush seperating

both front suspension arm front bushes seperating

rear anti-roll bar link bushes seperating

front suspension arm front bushes seperating

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

o/s/f suspension arm front bush seperating

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

front suspension arm bushes seperating

Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

both front suspension arm front bushes seperating

both rear outer sills corroded

front suspension arm front bushes seperating

front suspension arm bushes seperating

rear tyre treads 2mm on inner edges

wipers smeary

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

n/s rear tyre worn low on outer edge.

Offside Front coil spring fractured (2.4.C.1a)

Rear Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Front wishbone bushes seperating.