MOT Status
ValidMileage
59,868 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i))
Offside Front Service brake excessively binding (1.2.1 (f))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Headlamp aim too high and too far to the right. near & offside (4.1.2 (a))
Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Power steering pipes on steering rack corroded. Covered in grease.
Nearside Front Direction indicator incorrect colour (4.4.3 (a))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Power steering pipes on steering rack corroded. Covered in grease.
Brake load sensing valve linkage defective and function impaired (1.1.17 (a))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Brakes imbalanced across an axle pedal spongy (1.2.1 (b) (i))
Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))
Windscreen washer not working (3.5 (a))
Front Tyre worn close to legal limit/worn on edge both (5.2.3 (e))
Suspension component mounting repair covered in underseal (5.3.6 (a) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting step (6.2.2 (d) (i))
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i))
Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i))
Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting arch (6.2.2 (d) (i))
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis (6.2.2 (d) (i))
Nearside Front Side repeater not working (4.4.1 (a) (ii))
Offside Front Side repeater not working (4.4.1 (a) (ii))
Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))
Rear Service brake excessively binding both (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting around jacking point (6.2.2 (d) (i))
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Nearside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced behind front jacking point (6.1.1 (c) (i))
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting around jacking point (6.2.2 (d) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of wheel (6.1.1 (c) (i))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Front Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))
Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced in front of wheel (6.1.1 (c) (i))
Nearside Front Vehicle structure has slight corrosion (6.1.B.2)
Rear Body has slight corrosion (6.1.B.2)
exhaust corroded
n s f inner arch corrosion
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b)
Front passenger door cannot be opened from outside the vehicle (6.2.B.1b)
Nearside Side repeater not working (1.4.A.2c)
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Vehicle structure has slight corrosion (6.1.B.2)
Rear Body has slight corrosion (6.1.B.2)
exhaust corroded
n s f inner arch corrosion
Nearside Front Inner Body has slight corrosion bay panel (6.1.B.2)
Offside Front Inner Body has slight corrosion bay panel (6.1.B.2)
both inner front wheel arches corroded but outside prescribed areas
Horn not working (1.6.2a)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
both inner front wheel arches corroded but outside prescribed areas
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Front wheel bearing rough when rotated (2.5.A.2)
Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
off side front and nearside front inner wing /wheel arches excessively corroded but not in prescribed areas
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Registration plate lamp not working (1.1.C.1d)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside front brake binding (3.7.B.1)
Offside Registration plate lamp not working (1.1.5c)
Offside front brake binding (3.7.B.1)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
Nearside rear brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front brake disc slightly pitted (3.5.1h)
Offside Front brake disc slightly pitted (3.5.1h)
both front tyres worn slightly on the edges
high level brake light incompleat
How Reliable is the Fiat Ducato?
Based on 1,962,737 MOT tests across 142,446 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HV02 YFZ is a 2002 Fiat Ducato in White with a 2,000cc diesel engine. This vehicle has been through 34 MOT tests with a personal pass rate of 58.8%.
Across all 2002 Fiat Ducato models, the average MOT pass rate is 72.3% with a typical mileage of 47,763 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Fiat Ducato fails its MOT is windscreen wiper does not clear the windscreen effectively, accounting for 34,174 recorded failures. If you're considering buying HV02 YFZ, it's worth having these areas checked by a mechanic before committing.
The Fiat Ducato typically stays on UK roads for around 38 years. At 24 years old, this Fiat Ducato is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HV02 YFZ?
You can check the full history of HV02 YFZ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HV02 YFZ registered?
HV02 YFZ is a 2002 Fiat Ducato, first registered on 12 April 2002.
Is HV02 YFZ safe to buy?
The MOT history for HV02 YFZ shows 34 tests with a 58.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HV02 YFZ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HV02 YFZ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.