2002 Mazda E Series

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Suspension arm ball joint dust cover severely deteriorated o/s front covers (5.3.4 (b) (i))

body has corrosion n/s/f areas

body has corrosion o/s/f areas

o/s headlight has a slightly weak pattern

rear brake pipes have area slightly corroded

slight crack on o/s & n/s lenses

small crack in windscreen on n/s

Nearside Front Upper Suspension arm pin or bush excessively worn (5.3.4 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect no pattern (4.1.2 (c))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) DANGEROUS

Nearside Front Anti-roll bar linkage fractured anti roll bar link bar broken (5.3.3 (b) (ii)) DANGEROUS

Offside Front Upper Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Suspension arm ball joint dust cover severely deteriorated o/s & n/s front covers (5.3.4 (b) (i))

body has corrosion n/s/f

body has corrosion o/s/f

slight crack in o/s & n/s rear lenses

Brake load sensing valve stiff heavily corroded/weak (3.6.E.3)

Exhaust has a minor leak of exhaust gases various areas (7.1.2)

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Body has slight corrosion (6.1.B.2)

Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear Body has slight corrosion (6.1.B.2)

Nearside Rear lamp is cracked

Offside Front Body has slight corrosion (6.1.B.2)

Offside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Rear Body has slight corrosion (6.1.B.2)

Offside Rear lamp is cracked

Offside headlight has weak pattern

Shock absorber has slight corrosion to the casing o/s & n/s (2.7.2a)

Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

EXHAUST SYSTEM HAS SLIGHT LEAKS

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt BADLY -BORDER LINE (2.4.G.2)

Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt BADLY (2.4.G.2)

Nearside Front Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Body has slight corrosion WHEEL ARCH -BADLY (6.1.B.2)

Nearside Rear INDICATOR LENS CRACKED

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt BADLY (2.4.G.2)

Offside Rear Body has slight corrosion WING /BODY -BADLY (6.1.B.2)

Offside Rear LAMP LENS CRACKED

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Brake valve corroded but not excessively weakened (3.6.A.2b)

Nearside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH (6.1.B.2)

Offside Front Anti-roll bar linkage insecure BROKEN (2.4.G.1)

Offside Front Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings SILL (6.1.B.2)

Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings WHEEL ARCH (6.1.B.2)

EXHAUST SYSTEM HAS SLIGHT LEAKS

Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt BADLY -BORDER LINE (2.4.G.2)

Nearside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt BADLY (2.4.G.2)

Nearside Front Upper Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Nearside Rear Body has slight corrosion WHEEL ARCH -BADLY (6.1.B.2)

Nearside Rear INDICATOR LENS CRACKED

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Upper Front suspension ball joint dust cover deteriorated, but preventing the ingress of dirt BADLY (2.4.G.2)

Offside Rear Body has slight corrosion WING /BODY -BADLY (6.1.B.2)

Offside Rear LAMP LENS CRACKED

Offside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Brake valve corroded but not excessively weakened (3.6.A.2b)

Brake load sensing valve stiff (3.6.E.3)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Brake load sensing valve stiff (3.6.E.3)

Offside Headlamp not working on dipped beam (1.7.5a)

Rear registration plate deteriorated but not likely to be misread (6.3.1d)

Brake load sensing valve stiff (3.6.E.3)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Brake load sensing valve seized (3.6.E.3)

Brake pipe inadequately supported (3.6.B.1)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Offside Brake pipe inadequately supported (3.6.B.1)

rear brake application uneven (3.7.B.2)

rear parking (secondary) brakes imbalanced (3.7.B.6b)

Front Brake pipe slightly corroded (3.6.B.2c)

slight corrosion on pipe by valve

Brake load sensing valve inoperative (3.6.E.3)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Brake load sensing valve linkage seized (3.6.E.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)