2003 Mercedes-benz Vito

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Side repeater slightly discoloured (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Side repeater slightly discoloured (4.4.3 (a))

Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))

Offside Front Inner Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Nearside Upper Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Inner Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Rear Integral body structure is corroded but structural rigidity is not significantly reduced sill area (6.1.1 (c) (i))

Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Anti-lock braking system warning lamp indicates an ABS fault (1.6 (b))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Front Brakes imbalanced across an axle (1.2.1 (b) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill panel (7.1.1 (a) (i))

Offside Obligatory mirror seriously damaged, affecting the rear view (3.3 (b) (ii))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Nearside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Side repeater slightly discoloured (1.4.A.2f)

Nearside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Side repeater slightly discoloured (1.4.A.2f)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Side repeater slightly discoloured (1.4.A.2f)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Inner Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Nearside Front Anti-roll bar linkage worn but not seriously weakened (2.4.G.1)

Offside Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)