2003 Mercedes-benz Vito

Front Exhaust mounting defective mount rubber missin (6.1.2 (a))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front seat pad damaged

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust mounting defective mount missin (6.1.2 (a))

under side of vehicle corroded thin in places and heavily welded

Horn not working (7.7 (a) (ii))

Headlamp aim not tested (4.1.2 (b))

Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill/wheel arch (5.3.6 (a) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Nearside Rear Position lamp lens seriously defective (4.2.1 (b))

Nearside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii))

Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger (6.1.1 (c) (i))

Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt loose (6.1.7 (g) (ii))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded (7.1.1 (a) (i))

Front Exhaust mounting defective mount rubber missin (6.1.2 (a))

Nearside Rear Position lamp has a product on the lens or light source but not adversely affecting light intensity (4.2.3 (b) (ii))

Nearside Rear Rear reflector defective or damaged by up to 50% of the reflecting surface (4.8.1 (a) (i))

Nearside Rear Shock absorbers has slight external damage to the casing (5.3.2 (b))

Offside Front seat pad damaged

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake pad(s) wearing thin (1.1.13 (a) (ii))

Rear Exhaust mounting defective mount missin (6.1.2 (a))

under side of vehicle corroded thin in places and heavily welded

Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Seat belt anchorage prescribed area is excessively corroded outrigger (5.2.6)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Inner Seat belt anchorage prescribed area is excessively corroded sill (5.2.6)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Rear position lamp(s) damaged, but still visible from a reasonable distance (1.1.A.3d)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Obligatory mirror damaged, but not seriously affecting the rear view (8.1.2a)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Tyre worn close to the legal limit (4.1.E.1)

Horn not working (1.6.2a)

Nearside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Parking brake: efficiency below requirements (3.7.B.7)

Registration plate lamp not working (1.1.C.1d)

Windscreen washer provides insufficient washer liquid (8.2.3)

Nearside Rear Shock absorber has slight corrosion to the casing (2.7.2a)

Rear Tyre worn close to the legal limit (4.1.E.1)

Rear chassis corroded

Centre Exhaust has a major leak of exhaust gases pipe joint area (7.1.2)

Exhaust has a major leak of exhaust gases silencer (7.1.2)

Nearside Front Subframe mounting prescribed area is excessively corroded jacking point (2.4.A.3)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc inner (2.5.C.1a)

Offside Front Subframe mounting prescribed area is excessively corroded jacking point (2.4.A.3)

Rear chassis corroded

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Horn not working (1.6.2a)

Offside Front Anti-roll bar linkage ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Registration plate lamp not working (1.1.C.1d)

Brake load sensing valve seized (3.6.E.3)

Nearside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Service brake: efficiency below requirements (3.7.B.7)

Nearside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Track rod end ball joint has slight play (2.2.B.1f)

Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front brake disc in such a condition that it is seriously weakened (3.5.1i)

Windscreen wiper does not clear the windscreen effectively (8.2.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Tyre worn close to the legal limit (4.1.E.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Hazard warning switch faulty (1.4.B.1d)

Parking brake lever has no reserve travel (3.1.6b)

Nearside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Front Brake hose excessively deteriorated (3.6.B.4d)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Front Shock absorber has a slightly reduced damping effect (2.7.5)

Offside Front Brake hose slightly deteriorated (3.6.B.4d)

Offside Front Shock absorber has negligible damping effect (2.7.5)

Offside Track rod end ball joint has excessive play (2.2.B.1f)

Windscreen has damage to the swept area in excess of a 40mm circle outside zone 'A' (8.3.1d)