2006 Ford Ka

Nearside Front Windscreen wiper missing (3.4 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Seat belt anchorage prescribed area strength or continuity significantly reduced both offside and nearside front floor area (7.1.1 (a) (i))

Seat belt anchorage prescribed area strength or continuity significantly reduced both offside and nearside outer sills (7.1.1 (a) (i))

Suspension arm pin or bush excessively worn both offside and nearside front rear most (5.3.4 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength both offside and nearside rear inner arch (5.3.6 (a) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Obligatory mirror slightly damaged (3.3 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Sub-frame pin or bush worn but not resulting in excessive movement both offside and nearside rear (5.3.4 (a) (i))

Nearside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

surface corrosion inner sills

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Passenger seat(s) missing at time of test ()

Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Passenger seat(s) missing at time of test ()

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a) (ii))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Windscreen washer provides insufficient washer liquid (3.5 (a))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Coil spring fractured or broken (5.3.1 (b) (i))

Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Oil leak, but not excessive (8.4.1 (a) (i))

Offside Rear Lower Cab or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))

Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Parking brake: efficiency below requirements (3.7.B.7)

rear parking brake recording little or no effort (3.7.B.6a)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Stop lamp not working (1.2.1b)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Handbrake travel slightly high

Minor damage to n/s/f tyre outer sidewall

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

light cracking on all four walls

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

light cracking on all four walls