2008 Ford Ka

Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis (6.1.1 (c) (i))

Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sills (6.1.1 (c) (i))

Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sills (6.1.1 (c) (i))

Front Tyre tread depth below requirements of 1.6mm both sides (5.2.3 (e)) DANGEROUS

Front Headlamp lens slightly defective (4.1.1 (b) (i))

Front Windscreen wiper blade defective (3.4 (b) (i))

fuel cap area corroded

Nearside Front Wheel bearing slightly noisy (5.1.3 (b) (i))

Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sills (6.1.1 (c) (i))

Vehicle structure is corroded but structural rigidity is not significantly reduced outer sills (6.1.1 (c) (i))

rear exhaust bracket corroded

wipers smearing

Nearside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))

Nearside Rear Inner Vehicle structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Vehicle structure is corroded but structural rigidity is not significantly reduced chassis (6.1.1 (c) (i))

Rear exhaust bracket corroded

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front floor corroson

body corroson around fuel cap filler

Front Tyre tread depth below requirements of 1.6mm both (4.1.E.1)

Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement (7.2.4b)

Nearside Front Outer Front constant velocity joint gaiter damaged, but preventing the ingress of dirt (2.5.C.1a)

Offside Front floor corroson

body corroson around fuel cap filler

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Headlamp deteriorated but light output not reduced (1.7.5a)

Fuel system component insecure Filler neck top mount split and corroded at quarter panel (7.2.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded Inner sill corroded and holed (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded Quarter panel (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded Floor at seat mount (5.2.6)

Offside Front Front wheel bearing rough when rotated (2.5.A.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded Floor at seat mount (5.2.6)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive floor to sill (2.4.A.3)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive Chassis at front subframe front mount (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive floor to sill corroded (2.4.A.3)

Offside Headlamp deteriorated but light output not reduced Beam pattern only just visible (1.7.5a)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (2.4.A.3)

advise rear exhaust bracket weak replace soon

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

advise n/s rear handbrake cable support screw missing from fixing clip into rear inner sill

advise surface corrosion to n/s and o/s rear inner sill area

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Front Headlamp aim too low (1.8)

Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)