2010 Hyundai I20

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Electronic stability control warning lamp indicates a fault (7.12 (e))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))

Nearside Rear Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear bump stop broken

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake hose has slight corrosion to ferrule ALL REAR BOTH SIDES (1.1.12 (f) (i))

Offside Rear Lower Sub-frame corroded but not seriously weakened spring cup mounting (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Nearside Front Upper Macpherson strut top bush or bearing has excessive wear or free play (5.3.4 (a) (i))

Brake hose has slight corrosion to ferrule ALL REAR BOTH SIDES (1.1.12 (f) (i))

Offside Rear Lower Sub-frame corroded but not seriously weakened spring cup mounting (5.3.3 (b) (i))

Rear Brake pipe corroded, covered in grease or other material both sides (1.1.11 (c))

Brake hose has slight corrosion to ferrule All four front and rear both sides (1.1.12 (f) (i))

Nearside Front Upper Macpherson strut has slight movement in bush

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Brake hose has slight corrosion to ferrule All four front and rear both sides (1.1.12 (f) (i))

Nearside Front Upper Macpherson strut has slight movement in bush

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Offside Stop lamp(s) not working (4.3.1 (a) (ii))

Brake hose has slight corrosion to ferrule front and rear ALL (1.1.12 (f) (i))

Nearside Front Upper Macpherson strut pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Brake hose has slight corrosion to ferrules both sides (3.6.B.4e)

Nearside Front Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake hose has slight corrosion to ferrules both sides (3.6.B.4e)

Nearside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Side repeater slightly discoloured both sides (1.4.A.2f)

rear brake fluctuating, but not excessively both sides (3.7.B.3)

Nearside rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Offside rear brake fluctuating, but not excessively (3.7.B.3)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Front Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)