2006 Subaru Outback

Nearside Front Headlamp deteriorated but light output not reduced borderline faded image light output poor image (1.7.5a)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Central Front Bonnet cannot be secured in the closed position (8.4.1)

Nearside Front Headlamp deteriorated but light output not reduced borderline faded image light output poor image (1.7.5a)

Nearside Front Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)

Offside Front Front position lamp(s) not working (1.1.A.3b)

Offside Front Headlamp aim too high and too far to the right. (1.8)

Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Nearside Rear Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Side repeater damaged, but still visible from a reasonable distance (1.4.A.2e)

Rear Sub-frame corroded but not seriously weakened (2.4.G.1)

nearside headlamp beam image poor

surface corrosion on inner sills, rear floor and front cross member

tow bar corroded and tow ball not fitted at test

under trays and sill covers fitted

Front bumper insecure

Nearside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Rear Exhaust has a minor leak of exhaust gases (7.1.2)

Tow ball/hitch not fitted at time of test

Under-trays fitted obscuring some underside components

exhaust badly corroded

front cross member corroded

inner sill panels and rear subframe surface corosion

plastic sill covers fitted

power steering pipe corroded

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Headlamp aim too low (1.8)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Registration plate lamp not working (1.1.C.1d)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Tow ball/hitch not fitted at time of test

Towbar component slightly corroded (6.6.1)

Under-trays fitted obscuring some underside components

exhaust flanges coroded

plastic sill covers fitted

rear exhaust coroded

surface corosion on inner sills and floor pan, rear upper spring mounts

Nearside Front Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Oil leak

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.C.1b)

Tow ball/hitch not fitted at time of test

Towbar component slightly corroded (6.6.1)

Under-trays fitted obscuring some underside components

exhaust flanges coroded

plastic sill covers fitted

rear exhaust coroded

surface corosion on inner sills and floor pan, rear upper spring mounts

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Under-trays fitted obscuring some underside components

plastic sill covers fitted

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Front Brake pad(s) wearing thin (3.5.1g)

Front registration plate deteriorated but not likely to be misread (6.3.1d)

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Under-trays fitted obscuring some underside components

offside headlamp light output reduced

plastic sill covers fitted

Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

nearside front brake binding slightly

nearside rear tyre worn on outer edge