2006 Ford Ka

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner wheel arch (5.3.6 (a) (i))

Central Non obligatory mirror damaged ()

Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Macpherson strut pin or bush worn but not resulting in excessive movement upper mount (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced floor ( seat mount ) (7.1.1 (a) (i))

Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Nearside Rear Macpherson strut pin or bush worn but not resulting in excessive movement upper mount (5.3.4 (a) (i))

Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive sill (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner arch (5.3.6 (a) (i))

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch to sill end (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded chassis (2.4.A.3)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Nearside Rear Nail in tyre ()

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Nearside Front Headlamp aim too high (1.8)

Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Offside Front Headlamp aim too high (1.8)

Offside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)

Child seat fitted not allowing full inspection of adult belt

Child seat fitted not allowing full inspection of adult belt

Nearside Headlamp not working on dipped beam (1.7.5a)

Offside Headlamp aim too low (1.8)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Rear position lamp(s) not working (1.1.A.3b)

Nearside Registration plate lamp not working (1.1.C.1d)

both front tyres warn badly on inner edges

both front tyres warn badly on inner edges

Drivers seat tilt does not work.

Brakes imbalanced across an axle (3.7.B.5b)

Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)

Drivers seat tilt does not work.

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

O/S/F brake binding slightly.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

front brake application uneven (3.7.B.2)

Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

N/S/R and O/S/R tyres cracking on inner and outer sidewalls.Keep a check.

Slight damage to inside of O/S/F wheel rim.

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

N/S/R and O/S/R tyres cracking on inner and outer sidewalls.Keep a check.

Offside Rear position lamp(s) not working (1.1.A.3b)

Offside Stop lamp not working (1.2.1b)

Slight damage to inside of O/S/F wheel rim.

Front Brake pad(s) wearing thin (3.5.1g)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

gear selector seal leaking