2008 Honda Civic

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Position lamp not working (4.2.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Front Headlamp lens slightly defective (4.1.1 (b) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Parking brake inoperative on one side (1.4.1 (a))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear Suspension component corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Inner Position lamp with a multiple light source up to 1/2 not functioning (4.2.1 (a) (i))

Rear Subframe mounting prescribed area is corroded but not considered excessive rear axle (5.3.6 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Offside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Rear beam axles

Nearside Rear Road wheel slightly distorted (5.2.2 (c) (i))

Exhaust has a major leak of exhaust gases centre box and back box (6.1.2 (a))

Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii))

Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))

Tyre has a cut in excess of the requirements deep enough to reach the ply or cords Both rear tyres inner sidewall when weight is on them. (5.2.3 (d) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Seat belt retracting mechanism defective (7.1.2 (e))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Brake disc worn, pitted or scored, but not seriously weakened both front (1.1.14 (a) (ii))

Nearside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Inner Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (1.4.2 (a) (i))

Vehicles internal headlight adjuster altered to recheck lights

Windscreen washer provides insufficient washer liquid (3.5 (a))

Windscreen wiper blade defective both require cleaning (3.4 (b) (i))

under tray has some bolts missing but not likely to become detached

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Nearside Rear Registration plate lamp not working (1.1.C.1d)

Offside Rear Registration plate lamp not working (1.1.C.1d)

Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Front Headlamp incorrect colour (1.7.5b)

Rear Brake pad(s) less than 1.5 mm thick (3.5.1g)

Front Brake pad(s) wearing thin (3.5.1g)

Under-trays fitted obscuring some underside components

Nearside Rear position lamp(s) not working (1.1.A.3b)