MOT Status
ExpiredMileage
122,161 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Oil leak, but not excessive from oil filter (8.4.1 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Nearside Front Inner Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Nearside Rear Lower Seat belt anchorage prescribed area strength or continuity significantly reduced outer sill (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))
Offside Front Inner Brake pad(s) worn down to wear indicator (1.1.13 (a) (i))
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))
Supplementary restraint system warning lamp indicates a fault (7.1.6 (a))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Seat belt webbing slightly damaged or frayed (7.1.2 (b) (ii))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Road wheel slightly distorted (5.2.2 (c) (i))
Oil leak, but not excessive from oil filter (8.4.1 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Outer Drive shaft joint worn, but not excessively (6.1.7 (c) (i))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive inner sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (5.3.6 (a) (i))
Front Anti-roll bar pin or bush worn but not resulting in excessive movement O/S and N/S (5.3.4 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Tyre worn close to legal limit/worn on edge outer edge (5.2.3 (e))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Engine management light on
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Welding repairs coverings applied
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Engine management light on
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Welding repairs coverings applied
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Outer Track rod end ball joint has excessive play (2.1.3 (b) (i))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Front Service brake fluctuating, but not excessively (1.2.1 (e))
Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Rear Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Rear Sub-frame pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
eml indicates a fault
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Offside Front Lower Suspension component ball joint excessively worn (5.3.4 (a) (i))
Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Outer Subframe mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Lower Subframe mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Front Registration plate deteriorated but not likely to be misread (0.1 (b))
Nearside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Outer Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge Also has a nail in the tread. (5.2.3 (e))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive outer sill (2.4.A.3)
Front Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt both outer (2.5.C.1a)
Front Tyre worn close to the legal limit both front tyres nearing tread limit (4.1.E.1)
Brakes imbalanced across an axle (3.7.B.5b)
Offside Front front brake binding (3.7.B.1)
How Reliable is the Mazda Demio?
Based on 136,409 MOT tests across 10,090 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HW02 CMU is a 2002 Mazda Demio in Blue with a 1,323cc petrol engine. This vehicle has been through 29 MOT tests with a personal pass rate of 69%.
Across all 2002 Mazda Demio models, the average MOT pass rate is 74.2% with a typical mileage of 54,250 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda Demio fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 7,070 recorded failures. If you're considering buying HW02 CMU, it's worth having these areas checked by a mechanic before committing.
The Mazda Demio typically stays on UK roads for around 28 years. At 24 years old, this Mazda Demio is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of HW02 CMU?
You can check the full history of HW02 CMU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HW02 CMU registered?
HW02 CMU is a 2002 Mazda Demio, first registered on 20 March 2002.
Is HW02 CMU safe to buy?
The MOT history for HW02 CMU shows 29 tests with a 69% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HW02 CMU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HW02 CMU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.