2003 Piaggio Vespa

Front suspension has a slightly reduced damping effect (2.3.6c)

Centre Motorcycle structure slightly corroded (6.1.1a)

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Front Front wheel bearings have slight free play (2.3.5b)

Front Steering headbearing has slight free play (2.2.2)

Rear Exhaust noisy (7.1.2)

Rear Tyre valve stem slightly misaligned (4.1.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Tyre valve stem misaligned which could cause sudden tyre deflation (4.1.2c)

Front Wheel corroded significantly reducing the original strength (4.2.1a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Indicator tell tale not functioning (1.5.2)

Nearside Front Steering lock stop ineffective (2.1.3)

Nearside Rear Direction indicator not working (1.5.1c)

Offside Rear Direction indicator not working (1.5.1c)

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Front Front wheel bearings have slight free play (2.3.5b)

Front Steering headbearing has slight free play (2.2.2)

Rear Exhaust noisy (7.1.2)

Rear Tyre valve stem slightly misaligned (4.1.2c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

All position lamps slightly affected by the operation of another lamp (1.1.3b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

All position lamps slightly affected by the operation of another lamp (1.1.3b)

Brake locking device insecure (3.2.A1e)

Brake pedal cannot be released smoothly (3.1.3d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Riders seat insecure (6.2.1a)

Front Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Advise rear no plate be changed

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Rear wheel bearings have slight free play (2.4.A.2c)

non-std exhaust silencer fitted

rear brake back plate slight contamination

Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.3)