2004 Yamaha DT125

Rear suspension bush has excessive free play (2.4.A2a(i))

Front Steering headbearing has slight free play (2.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Indicator switch insecure (1.5.4)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Footrest missing (6.2.1a)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp aim too high and too far to the right. (1.6)

Rear Brake pedal cannot be applied smoothly (3.1.3d)

Rear reflector on motorcycle missing (1.4.1)

Wheel spoke excessively loose (4.2.1b)

Front Brake disc(s) insecure (3.2.A1g) DANGEROUS

Front Wheel has a slightly distorted bead rim. (4.2.2)

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings have slight free play (2.3.5b)

Steering movement slightly 'notchy' (2.2.1b)

Drive chain excessively tight (6.2.1d)

Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Front wheel spindle securing nut(s) loose (2.3.3a)

Headlamp dipped beam affected by the operation of another lamp (1.2.2c)

Horn control defective (1.7.2a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear reflector on motorcycle missing (1.4.1)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings have slight free play (2.3.5b)

Steering movement slightly 'notchy' (2.2.1b)

Wheel alignment slightly misaligned. (2.5.1)

clutch adjuster missing

gear lever loose

Front Footrest insecure (6.2.1a)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front Front position lamp insecure (1.1.1c)

Front Front wheel insecure (4.2.3b)

Front Headlamp aim headlamp damaged and function impaired (1.2.3a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel has an excessively distorted bead rim. (4.2.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Headlamp aim too high (1.6)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear Registration plate deteriorated (6.3.1d)

Chain guard missing