MOT Status
ExpiredMileage
106,290 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and sill (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing and inner sill (5.3.6 (a) (i))
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis floor and inner wing (6.1.1 (c) (i))
Nearside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Offside Front Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
tyres worn uneven
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Stop lamp(s) not working (4.3.1 (a) (ii))
Offside Windscreen washer provides insufficient washer liquid (3.5 (a))
Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
tyres worn uneven
rear tyres worn on inner edge
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear outer sill (5.3.6 (a) (i))
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))
Brake fluid close to minimum mark (1.1.10 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
front tyres worn on inner edge
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Oil leak, but not excessive (8.4.1 (a) (i))
Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Nearside Rear Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Offside Rear Upper Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
Vehicles internal headlight adjuster altered to recheck lights ()
Front Brake pad(s) wearing thin (3.5.1g)
Front Brake pad(s) wearing thin (3.5.1g)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Front Brake pad(s) wearing thin (3.5.1g)
Dipswitch operation does not deflect all main beam headlamps to make them dipped beams (1.7.4b)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement (2.4.G.2)
Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Front coil spring broken (2.4.C.1a)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Speedometer cannot be illuminated. (6.7.3)
Nail in offside rear tyre
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
front tyres worn on inner edge
front tyres worn on inner edge
Offside Front Suspension arm has excessive play in a pin/bush (2.4.G.2)
Nearside Front Suspension arm has slight play in a pin/bush (2.4.G.2)
Nearside Rear Macpherson strut has slight movement at the upper attachment (2.5.A.1c)
offside rear tyre starting to deteriorate on inner edge
Front registration plate delaminated (6.3.1d)
Nearside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
Offside Front Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b) DANGEROUS
nearside rear brake readings slightly low
offside rear tyre starting to deteriorate on inner edge
Offside Front Suspension arm rubber bush bonding deteriorated resulting in excessive movement (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Nail in nearside front tyre
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Rear Shock absorber has a slightly worn bush (2.7.4)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Rear Shock absorber has a slightly worn bush (2.7.4)
How Reliable is the Ford Ka?
Based on 8,818,307 MOT tests across 675,715 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HW06 AFN is a 2006 Ford Ka in Red with a 1,599cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 54.2%.
Across all 2006 Ford Ka models, the average MOT pass rate is 69.7% with a typical mileage of 42,791 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Ford Ka fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 404,005 recorded failures. If you're considering buying HW06 AFN, it's worth having these areas checked by a mechanic before committing.
The Ford Ka typically stays on UK roads for around 29 years. At 20 years old, this Ford Ka is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HW06 AFN?
You can check the full history of HW06 AFN by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HW06 AFN registered?
HW06 AFN is a 2006 Ford Ka, first registered on 17 March 2006.
Is HW06 AFN safe to buy?
The MOT history for HW06 AFN shows 24 tests with a 54.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HW06 AFN have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HW06 AFN. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.